Thread: VTP action core stock build

Having a few teething issues with the inlet core at first I couldn't close the bolt as the handle fouled on the inlet....easy I'll dremel the bit its fouling on......should've clicked the action screws were out by about 2mm and the tang wasn't fitting flush at the back of the inlet by 2mm....bingo the shelf the recoil lug beds against is 2mm too far forward.
Will have a yarn to a mate of mine to see if he can mill it back a couple mm cause I think trying to dremel it will end up a mess.
Will talk to Aiden at VTP and let him know as the core is still a prototype hopefully I can mod mine to work otherwise it'll be start from scratch again.....