If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
Hi @Steelisreal yes it’s a new build still in the white. Will get a satin blue job done once the stock is completed. Very observant of you about the forend, it is short at 8”. I’m having a barrel band installed for the front sling attachment, and am going for the safari rifle look. The barrel is 22” from the bolt face. The forend length is a bit of a compromise, the old pommy guns-Rigby stalkers and the like only had a 6” forend and 10” is about standard for most modern sporters. I wanted that old school big game look without going to extremes.
I weighted it tonight, and despite all the steel in the bottom metal and the #3 profile barrel it will weigh 7.48lb with VX3HD 1.5-5 scope and steel dual dovetail rings. Going to be lively!
Interesting about the fore-end length. where do you measure from? I have a beater I could play with for practice that has some fore-end damage. Most of it might be gone if i shorten it appropriately.
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks