Printable View
Anyone have any info on what the rules are about making your own "thumb hole" A-cat stock for a AR. Everything on the market is either shite or way over priced. It'd be nice to convert a Magpul UBR and still be able to use the adjustable function. I have the design skills and connections to get it made to a high standard so its not going to be a hatchet job. Thanks for any info...done a good search and couldn't find anything
I think if you were to have a telescopic connector bar running from stock to pistol grip you would probably be ok
You'd be making the pistol grip no longer free-standing, but you want the stock to still be telescopic? My understanding is that if it can be adjusted without tools, it's an MSSA.
Sent from my SM-T800 using Tapatalk
ok ..yea still want it to adjustable . I was thinking of attaching the "bar" from the front QD mount on the UBR down to the grip so its not free standing anymore and that still lets the UBR be adjustable. But if the law is about the stock being adjustable then I'd have to go down the route of fixing it from the butt to the gripQuote:
Originally Posted by stretch
lol now I do know I have said I have design skills and am proceeding to use ms paint...but its time for bed not busting out solidworks lol but this is the concept. Where/who do I go to find out about the law? NZ dealers must have to submit their A-cat stocks to the police Armorer
The law is not defined that well. http://www.legislation.govt.nz/act/p....html#DLM72627.Quote:
Originally Posted by DCA
All it says in this regard is "a folding or telescopic butt". Neither the term folding nor telescopic are defined in the act, so we should rely on their commonly understood meaning. Folding things rotated around a pivot axis. Telescopic things have two or more coaxial or concentric parts that slide inside/outside of each other.
Think outside the box and you'll come up with ways of keeping an adjustable stock by using mechanisms other than folding or telescopic.
The police will think you're taking the piss, and they'll likely harp on about the "intent" of the wording of the act. They also seem to have a fetish for losing these arguments when it goes to court.https://uploads.tapatalk-cdn.com/201...2d5ecc120a.jpg
Sent from my SM-T800 using Tapatalk
Just get your E, it's not hard at all.
But then I can't supervise others using it, nor can I let other endorsed shooters have a go without going through the permit to procure process. Twice.Quote:
Originally Posted by Savage1
Sent from my SM-T800 using Tapatalk
Whilst I agree it's fucking stupid, you don't actually have to complete the permit to procure process. The user gets the permit which is valid for (30days?) and that then permits them for that period. Instead of completing it you just let it lapse so the original owner needs not do anything.Quote:
Originally Posted by stretch
The new versions on the AIl stocks are A-Cat with adjustable LOP, fucking ugly but gives you an idea that you can have an adjustable stock in A-cat
have you looked at the 54Industries stocks? they look pretty cool for A-Cat
Yea think I will now..Quote:
Originally Posted by Savage1
Yea I do like 54 industies stocks but can't justify the money they want for them and still not be adjustable... Think I'll jus jump through some hoops for my E-CatQuote:
Originally Posted by Paddy79
Attachment 73055
If my understanding is correct technically you could do this.
It is connected at two point and is therefore no longer free standing.
Attachment 73056
From the legal definition above, this would meet the standard and could be fitted to any M4 type butt stock and uses pre-existing mounting points (rear sling swivel and pistol grip screws)
A) Orange would replace the rear sling swivel, and is a rear sling point and a sturdy hollow steel tube with lengthwise slit. This would mount where the sling swivel mounts, and act as an outer sleeve for the pistol grip extension. The lengthwise slit is to allow a captive retaining pin in part B to move back and forth when the stock is extended or collapsed, but not allow the extension to pop free accidenally.
B) Red is a sturdy steel rod that mounts inside the pistol grip using the pistol grip retaining screw/bolt. It extends downward out of the grip, then back up in line with part A's tube. It slides lengthwise inside part A and is retained by a small cross pin.
I would try to make these to sell... but frankly I know I would never get around to it, so maybe someone out there can make use of it. Also go easy on my artistic skills ;)
Attachment 74365
All that said, the more E cat (and other endorsements) that're held, the stronger the shooting community is as a whole. If they decide to go after one group, they aren't going to leave A-Cat alone, so may as well have skin in the game.
Gunsnz already make a similar stock to that one
Haha - figures... guess I should've spent more time googling than trying to draw in paint :P . I saw the rod that mounts in place of the lock pin, but figured it's not adjustable so didn't meet DCA's goals.
Edit - I just reread further and saw the post about folding/telescoping butts qualifying for MSSA... so yep, pointless thought exercise.
