Thread: Greek Brass Quality

A mate gave me some fired Greek brass that I cleaned. Check the state of it. Vendors need to up their QC game.

That's bad! I've got some loaded stuff which is tarnished but haven't found any pitting.
Have had to pull a few for a few issues. Clumped powder, loose projectile etc.
Definitely don't shoot it unless you check each round.

Agreed. I simply biffed the spent brass into my st@inless pin tumbler after depriming, pocket cleaning and neck sizing. That’s when I discovered these.

Alot of the Greek brass is shagged. Something has happened to it for it to go brittle. Seeing alot of it at the tail end of the ammo that's left. I have a lot of it that has no neck tension which I have been pulling and reloading the powder and bullet into good brass.

Originally Posted by Beavis

Alot of the Greek brass is shagged. Something has happened to it for it to go brittle. Seeing alot of it at the tail end of the ammo that's left. I have a lot of it that has no neck tension which I have been pulling and reloading the powder and bullet into good brass.

Bit of a bugger, I brought 200 a year or so ago with the hopes primarily of using the brass after firing. Might not get much life out of them!
Also might have to buy a .303 broken shell extractor before I actually need one!

Have wet tumbled the 50 odd I've fired and the brass looks great otherwise.

A friend of mine sighted his SMLE at my place during the weekend, and had a few cases rupture and one round hangfire. What is the headstamp on these Greek cases? Are they late 60's-early 70's?

Originally Posted by schwen

A friend of mine sighted his SMLE at my place during the weekend, and had a few cases rupture and one round hangfire. What is the headstamp on these Greek cases? Are they late 60's-early 70's?

HXP mid 60’s to early 70’s

Originally Posted by Ingrid 51

A mate gave me some fired Greek brass that I cleaned. Check the state of it. Vendors need to up their QC game.Attachment 202320

These Gun City guys need a kick in the pants from the Arms officers about this. The early stuff was good quality but its gradually been getting worse.

They should be sorting the crap rounds out from the better stuff. They can at least recover the projectiles.

We might all think its cheap ammo but what happens when one of our mates has a catastrophic failure because of the crap state of the corroded brass.

A question for everyone. Do Gun City have a responsibility under their dealers license to only sell safe and fit ammo?

I took stuff back that I wasn't happy with and got a refund. (Bronco's not G City)
Be reminded though that they are not selling it as reloadable brass, merely mil surp that goes bang.

Originally Posted by johnd

I took stuff back that I wasn't happy with and got a refund. (Bronco's not G City)
Be reminded though that they are not selling it as reloadable brass, merely mil surp that goes bang.

If this is correct then they are admitting that the brass is faulty which is a disgrace. A phone call to the arms office will sort that out
Some guys clearly don’t value their dealers licence.

Originally Posted by omark

If this is correct then they are admitting that the brass is faulty which is a disgrace. A phone call to the arms office will sort that out
Some guys clearly don’t value their dealers licence.

I don,t think it’s that simple, most shops give refunds if customers are not happy with the product, does not mean the product is faulty, just the customer is unhappy.
Beware what you are asking for with getting the arms office involved, If we rang the arms office every time we here a stupid remark from a customer the number of customers /firearms owners would drop dramatically.

Originally Posted by Taff

I don,t think it’s that simple, most shops give refunds if customers are not happy with the product, does not mean the product is faulty, just the customer is unhappy.
Beware what you are asking for with getting the arms office involved, If we rang the arms office every time we here a stupid remark from a customer the number of customers /firearms owners would drop dramatically.

Sorry I value my mates and their safety
This shit shouldn’t be sold. Have another look at the photos Ingrid posted

Originally Posted by omark

Sorry I value my mates and their safety
This shit shouldn’t be sold. Have another look at the photos Ingrid posted

Agreed if it dangerous it should not be sold, but the problem is , when we had non in stock, customers asked for it, one even travelled to Auckland to buy several hundred, only complaint we have had is about odd ones that don’t fire, we have no problem selling federal 303 which is now $99.99 for twenty but customers seem to have a problem, hopefully a delivery of privi will be here soon.

Originally Posted by omark

If this is correct then they are admitting that the brass is faulty which is a disgrace. A phone call to the arms office will sort that out
Some guys clearly don’t value their dealers licence.

They're probably totally clueless.

If you sort through the crap some of it's alright, I'm over 10 reloads on some of it without annealing.