Thread: Support for tighter Acat storage

Recent proposes to law changes regarding firearms has caused quite a stir and caused many to be very vocal about their opinions, some of which are more drastic than others. One point I've always looked at and thought needed improving was basic storage requirements of A category firearms.

Current standards approved by I have no idea who, But enforced by police (to their dismay) allow things such as a simple mild steel eye bolt into a wall stud with a wire cable etc to attach firearms, a basic stamped metal cabinet that could be cut with tin snips, or even just a cable around hot water cylinder pipes etc. Let's be honest here and agree that these options are pathetic (and most Acat safes) and we can do better than that as a community to protect out hobbies and investments.

What's wrong with making stout (ie more than 1mm Acat safes) boxes/safes which are securely attached to walls/floors a mandatory requirement and ditching the minimum? Such as how we do our Ecat/Bcat. I get cost may play a factor, but if we're spending thousands and thousands on our firearms then we can invest in secure storage.

Another touchy subject is making all semi autos (.22 and shotguns etc excluded) into Ecat or a new class where a process similar to permit to preclude must be followed. Because what semi autos do you hunt with that aren't ar15/AK derivatives? I only vaguely support this because any Joe Bloggs with a FAL can buy an Acat Ar15/AK and then buy a 30 round mag on the same licence (pretty sure you don't even need a licence?) And then sell it onto a criminal. Please don't come at us with the usual "police should do a better job vetting", and "they need to make longer sentences", because we need to do our part as well to protect our sport and future.

Please add your ideas and solutions as to what changes can be made to have a middle ground between us and police/anti gunners to make all parties happy.