Thread: DIY Fibre wads?

Originally Posted by zimmer

Yep, those tiles are thinner than the older original Pinex I used. Would need to put in maybe an extra wad. As far as using a 22mm hole saw it might work if the teeth are removed by grinding down leaving just a sharp ege. Pinex is too thick to wack with a wad punch unfortunately.

Wads need to be tight in the barrel so there's no blow past and destruction of the pattern, also the tight wads help to sweap the barrel of BP muck.

How about getting a shit load cut by a CNC laser cutter or water jet cutter?

May or may not work, and probably be worth it if a bunch of us chipped in for a big sack of em cut.