Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Ammo Direct Gunworks


User Tag List

+ Reply to Thread
Results 1 to 13 of 13
Like Tree4Likes
  • 1 Post By
  • 1 Post By Tedz50
  • 1 Post By Peteforskeet
  • 1 Post By Tedz50

Thread: Slugs with Unique

Hybrid View

  1. #1
    Member
    Join Date
    Feb 2014
    Location
    Christchurch
    Posts
    1,021
    Quote Originally Posted by Moa Hunter View Post
    I would go with a slower powder than 700x because a tight slug could cause more of a pressure spike than a shot load.
    700x melts the crimps on cases so it must be so fast in practice that it burns in the case. Perhaps something with the burn rate of PB. A slower powder likely will give better accuracy if the same effects apply as with rifles
    The following from Ballisticproducts.com.

    "Unique's burn rate is to fast for Lee slugs, unless you want reduced loads. There is no data using plastic wads & Lee Key drive slug & Unique powder, that i know of? I worked up some Unique loads with 1 oz Lee
    Key Drive slugs. Acccuracy was poor. Pressure needs to be high enough to expand the slug to the bore."

    https://www.ballisticproducts.com/load14_04_25.htm
    rupert likes this.

  2. #2
    Member
    Join Date
    Jun 2021
    Location
    huntly
    Posts
    808
    Quote Originally Posted by Tedz50 View Post
    The following from Ballisticproducts.com.

    "Unique's burn rate is to fast for Lee slugs, unless you want reduced loads. There is no data using plastic wads & Lee Key drive slug & Unique powder, that i know of? I worked up some Unique loads with 1 oz Lee
    Key Drive slugs. Acccuracy was poor. Pressure needs to be high enough to expand the slug to the bore."

    https://www.ballisticproducts.com/load14_04_25.htm
    Ok. I guess I'll be be using AP70N

  3. #3
    Peter
    Join Date
    Sep 2021
    Location
    Chch
    Posts
    120
    If it's in a plastic wad ,plus having a bridge across the base of the slug how's it ever going to expand to bore size?
    woods223 likes this.

  4. #4
    Member
    Join Date
    Feb 2014
    Location
    Christchurch
    Posts
    1,021
    QUOTE=Peteforskeet;If it's in a plastic wad ,plus having a bridge across the base of the slug how's it ever going to expand to bore size?[/QUOTE]

    I have a Gibb 62 calibre rifle and use 20 gauge slugs in a plastic wad. This slug has a solid base but even inside a wad it expands from a loose sliding fit to deeply engrave the rifling on the wad.This is probably due to the fast ignition of black powder which in spite of the wad shortens and expands the projectile.This is one reason I believe a fast powder like 700X is used. If you pick up fired wads they show scouring from the trip down the barrel. The keyes built into the lee slug base help it expand with out collapsing.Just my opinion for what its worth.

    Name:  P1000224.JPG
Views: 223
Size:  5.53 MBName:  P1000225.JPG
Views: 223
Size:  5.84 MBName:  P1000226.JPG
Views: 212
Size:  7.85 MBName:  P1000228.JPG
Views: 204
Size:  5.47 MB
    Micky Duck likes this.

 

 

Similar Threads

  1. Unique X-51 bis
    By Tentman in forum Firearms, Optics and Accessories
    Replies: 4
    Last Post: 05-12-2018, 06:29 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!