Thread: Price/quote section

Originally Posted by .22-250 everything

Rough price to bed and stiffen the forend on a Tikka T3, and do you offer a load development service?
Lachlan

To alloy pillar an bed action and stiffen the fore end would be 365 an freighted back. I do do loads but price depends on if I supply everything or you do? Base price of 180 an goes up from there

Sent from my GT-I9300T using Tapatalk 2

If I had an old BSA .243, how much to re-barrel into a 338 Fed, threaded and put a weaver rail on top?

Originally Posted by Vapour

If I had an old BSA .243, how much to re-barrel into a 338 Fed, threaded and put a weaver rail on top?

Sorry for the delay here never seen it sorry.

If you had a old bsa to make it into a 338fed an rail would be, depending on barrel
barrel fitted an chambered starts from $690
threaded an cap is $70
rail depending if want cant etc milled into is starts at $110

thankyou

Originally Posted by tui_man2

To alloy pillar an bed action and stiffen the fore end would be 365 an freighted back. I do do loads but price depends on if I supply everything or you do? Base price of 180 an goes up from there

Sent from my GT-I9300T using Tapatalk 2

Greetings from Seattle. I am looking for the same stock work and bedding on a Sako A7 in .270 WIN. Will probably use the rifle as is over Christmas / New Year in Southland and leave it with my cousin who has a NZ FAL. No real time line for the work as I won't be back until late 2014. Thanks.

Originally Posted by KiwiinSeattle

Greetings from Seattle. I am looking for the same stock work and bedding on a Sako A7 in .270 WIN. Will probably use the rifle as is over Christmas / New Year in Southland and leave it with my cousin who has a NZ FAL. No real time line for the work as I won't be back until late 2014. Thanks.

Hey
So its bed action an stuffen up forend?
$330 for the above if its so $230 for the bed an $100 for the forend of the stock
Cheers Abe