Good Morning,
This week is we are going semi auto:
Attachment 98763
Attachment 98764
Printable View
Good Morning,
This week is we are going semi auto:
Attachment 98763
Attachment 98764
Good Morning,
This week we have a Patriot precision rifle in 300 wsm:
Attachment 99364
Attachment 99365
Attachment 99366
Hi,
This week is another 300 WSM , but a more simple Tikka with a brake:
Attachment 99813
Attachment 99814
Interesting base for a rebarrel. Has it gone back into the original xpr stock?Quote:
Originally Posted by Friwi
Sent from my SM-A520F using Tapatalk
Hi,
Yes I believe it has, but the barrel channel had to be opened up a bit. The Winchester XPR and the browning AB3 are the same rifle pretty much, only the Winchester has a real metal trigger as the browning is a plastic one.
Good Morning,
Today it is a CZ Ebony edition in 223:
Attachment 100267
Attachment 100268
Good Morning,
This one is for the lefthanders, and it is a rifleman's rifle! a Craig Boddington special, a Winchester 70 left hand.
The first I ever seen, I am not sure if they are still produced and if many are in the country.
It is in 300 win mag, it has a very nice and well bedded stock, a mid-heavy barrel and finished with one of our brake: all the attributes of a good long range hunting rig.
Attachment 100599
Attachment 100600
Attachment 100601
Good morning,
I will carry on with the rifle of the week post.
Today we have a pair of Tikkas ready for the roar:
Attachment 107179
How long are the barrels now that your over barrel section is longer on the new model? I guess you can have similar overall length with a slightly longer barrel compared to the old unit.Quote:
Originally Posted by Friwi
there is one forsale....its in the BLR wanted thread. a mate in Sweden uses one to great effect,thats in a laminated mod 7....Quote:
Originally Posted by Flyblown
I will have to check the dimensions tomorrow for the tikka barrel length with the mk2 suppressor.
So a Tikka t3 with the MK2 suppressor to the stock forend will have a barrel length of 15 3/4" and about 17 1/2" with the magnum version of the MK2.
Good morning,
This week we have a Bergara fluted and suppressed:
Attachment 108765
Attachment 108766
Attachment 108767
The barreled action will be cerakoted by the customer .
Hi ,
This week we have a Tikka in 7 Rem Mag with one of our directional brake.
Attachment 110141
Attachment 110143
there was a Belgian BLR in 358 in Manawatu/Palmerston North H n F couple months back...................Quote:
Originally Posted by Micky Duck
Hi ,
This week we have a Tikka in 223 into one of our chassis with a magnum over barrel suppressor.
Stock and pistol grip were supplied by the customer.
Attachment 110697
Attachment 110698
@Friwi Is there any real advantage using a magnum suppressor over a standard decibel wise with a small cartridge like the 223?
It all depends on how you intend to use the suppressor:
- if you want light and compact and you don't intend to add more than 1 or two baffles in the future , go with a standard one.
You can off course add more ( up to ten) but you will significantly increase the overall length.
If you want things to remain compact and very quiet, or you know straight away that you are going to add more than two baffles on a standard one then you may want to look at going with a magnum suppressor.
How much quieter is the magnum over standard. Intrigued.
On a 223 ,I do not know, as we never had the opportunity to test our suppressors in that caliber.
This week, we have a pair of lever action rifles.
Attachment 111101
Good morning,
Today we have a fluted a Tikka barrel in 7 rem mag into a carbon stock
Attachment 111766
Attachment 111767
Attachment 111768
We run an extra baffle[7] and also a ss baffle at the muzzle . We think it is quieter than the standard setup. Regardless it allows superb balance. You chopped all out barrels to 19in.Quote:
Originally Posted by Friwi
We haven't had a gun of the week for awhile Gentlemen.
I ll work on it tomorrow;-)
And you haven't mentioned the Highlanders for a while. Full of confidence for this season again?? :)Quote:
Originally Posted by jakewire
Well we were one of three NZ teams that didn't lose on the weekend, your lot didn't seem to to so well?:(
Hah. I don't have a "lot". :) Overall, NZ rugby is on the decline.Quote:
Originally Posted by jakewire
Thread highjack over.
Quote:
Originally Posted by Tahr
Oh Tahr mate...please ,please......a mouthful of very hot mustard if you please.....
So this week we have a new Mauser M18 in 6.5 PRC . The scope rail on the top is one of our DPT 20 MOA rail for Remington Long Action which fits perfectly.
Attachment 129686
Attachment 129687
Attachment 132997
Hi,
This week rifle is a Remington 7 in 308,into a HS precision stock, cut at 16".
Ready for the roar.
Hi,
Another nice rifle for this week:
Attachment 133673
Attachment 133674
Defiance Deviant in 6mmGT into one of our hunter chassis.
Hi,
This week we have a Tikka T3 in 300wsm that we fluted and cut down to 20" and suppressed.
Attachment 138118
Attachment 138119
Who did the build / barrel chambering for the 6GT??Quote:
Originally Posted by Friwi
The customer provided the reamer and the action to Hardy who fitted their carbon barrel onto it.
We modified the inside of our chassis to accomodate the barrel profil and installed the barrelled action into it.
