Thread: Bare shaft tuning

Originally Posted by silentscope

No I bought it online so it arrived factory setup. I'll have a look for that video aswell. The more I look into it the more other stuff like cam timing (even though its single cam) and cam lean etc that could be causing some of the problem. All very interesting

Um factory setup isn't really a thing unless you mean a store like advanced archery set it up then shipped it to you. Did the rest and sight etc come fitted? Is there a peep fitted?

Originally Posted by Stocky

Um factory setup isn't really a thing unless you mean a store like advanced archery set it up then shipped it to you. Did the rest and sight etc come fitted? Is there a peep fitted?

It come with everything attached out of the box. I set my peep and my draw length and centered my rest and went from there.

Do these limbs look to be on an angle from the riser or is that normal...

Originally Posted by silentscope

Attachment 136305
Do these limbs look to be on an angle from the riser or is that normal...

If you took that picture exactly from above than yes that that looks a bit wonky.

Originally Posted by Boar Freak

If you took that picture exactly from above than yes that that looks a bit wonky.

Is that worth worrying about?

Originally Posted by silentscope

Is that worth worrying about?

I'd be careful mate. It seems your a bit out of your depth. It's hard to tel from photos but if it is leaning your more likely to derail your bow and have a big fuck up. It looks like you brought a RTS (ready to shoot) kit. Which is a misnomer. In that they mean it's got all the bits to shoot but is most definitely not tuned. The cams can be moved with bushings if it's similar to my pse which may mean they are out of wack leading to the lean if there is lean (hard to tell from the photos). I'd go to see Paddy Long in Chch after lockdown. Www.bowhunt.co.nz is his website I think.

Originally Posted by Stocky

I'd be careful mate. It seems your a bit out of your depth. It's hard to tel from photos but if it is leaning your more likely to derail your bow and have a big fuck up. It looks like you brought a RTS (ready to shoot) kit. Which is a misnomer. In that they mean it's got all the bits to shoot but is most definitely not tuned. The cams can be moved with bushings if it's similar to my pse which may mean they are out of wack leading to the lean if there is lean (hard to tell from the photos). I'd go to see Paddy Long in Chch after lockdown. Www.bowhunt.co.nz is his website I think.

I'm not messing with any of that stuff more just curious of whats normal

Originally Posted by silentscope

I'm not messing with any of that stuff more just curious of whats normal

What I mean is that to even it out if its a tuning issue you need to usually either swap shims to move cams left or right or add twists to one side on the cable to even up the lean. Both of which require a bow press. What's normal is for the cams limbs and limbs to be parralel with the string. It's not normal to have things not all straight or very close to straight. Derailments are genuinely dodgy and the violence of them often projects the peeps out of the string and has blinded people before.

Shoot it if you like but with the limited info you've provided I'm not going to say it's safe or normal. The irratic bare shaft is telling you something isn't right.