Thread: DIY Foam Target

Made this archery target over the Christmas break.



It's made from Polytuf foam gym pads and wrapped with duct tape then clear duraseal:
On the target side - under the tape - I used plastic cardboard (real-estate signage) which helps to staple the paper targets on.

Here's how to make one:
https://www.youtube.com/watch?v=N53Ok4K0w70

I used 4 packs of pads which cost just under $80 as I had the duct tape and plastic cardboard already.
I just wrapped it in duct tape and didn't use liquid nails as he suggested.

The measurements are:
580mm heigh
360mm wide
360mm deep

It's light but hardy. I haven't had any pass-throughs even at 10m with field points or practice broadheads (bow set at 65 poundage).
I reckon you could make a smaller cube version of it using only two packs of pads for around $40ish.