Thread: Experienced bowhunter test custom made arrows

Hey there folks ..been a member since 2014 but only confirmed my registration a couple weeks ago so hey ..

I am looking for a experienced compound bow hunter who is keen to try out some customs made micro diameter arrows with broadheads ..

I am a keen enthusiast of tweaking my own equipment and definitely would like to have my own archery/bow hunting business and thought I would start with custom made arrows ..

I have a workshop set up in my garage and would definitely like to have a bowhunter test these custom builds ..

The requirement is I am wanting a bowhunter with a 28.5" draw length ..

3 custom made arrows and broadheads that have been spined so they all flex in the same manner ..this set up flys like a dart and pounds like a jackhammer

This is a setup I build for myself shooting a 61.5lb Bowtech Carbon Knight set at 28.5" draw the details are as follows (Theme is black & yellow)

- Over all length of arrow from nock groove to tip of broadhead is 28.5" (27" end of outsert)
- Deer Crossing SD hunter 350 micro diameter shaft
- Norway 2.1" fusion vanes (cock vane black, 2x yellow)
- transparent yellow pin nock & aluminium insert
- black aluminium outsert
- broadhead look a like
- 454grains (+-1 grain between the 3 arrows)

My drop away rest is 25" from the nock groove @ full draw ..it has room for another inch (26") before your messing with the outsert which flanges out from 6.1mm - 7.93mm (standard size) ..so if your rest falls within these thresholds give em a crack

Note:
From my experience the broadhead hits the same spot as the field point no messing around with gear (with a tuned setup)

Copy & Paste: https://youtu.be/plmEVRzZb2g (me shooting these in action with a field point & broad head @ 50m)

So leave details along with photos of Deer taken and I will carefully choose a candidate

Best Regards




Sent from my iPhone using Tapatalk