Thread: Anyone Using a .40 Tanfo Limited Custom in Standard Division?

At the moment the Tanfoglio is in a state of disrepair after mil-speccing it and not getting around to reassembling it. Be aware that getting a base LC model and trying to later retrofit xtreme sear hammer combo may require fitting...not plug and play.
Tanfoglio in recent year has gone for putting a spacer in the back of 40S&W mags so you have to load the rounds short so slightly more barky unless you get some 10mm mags and do some tinkering with the follower.
They shoot pretty good. They were for years a bit of an oddity as the local agent didn't really push them, only when GunsNZ took over dealership have their numbers increased. There aren't the same numbers of aftermarket component manufacturers that there are for 2011s. That being said getting most parts from Eric Graufell's shop and Tanfoglio in Italy is easy, no DoS export permits in the mix.
I wouldn't go the glock route especially for standard division, 40 S&W at major PF can be a snappy round combined with a light polymer frame meh.