Thread: Long shot

Originally Posted by nzfubz

Nah just my originals 2xsti 1xsps and 1 SVI just to be different

You like doing things the hard way. I'm just using SPS now, once I found that they worked well I just bought a bunch of them.

Ive got one still new in the bag, so I ran the calipers over it to get the feed lip dimensions. Sure enough the 4 I use all the time had spread out a bit.

Originally Posted by Ozzy

You like doing things the hard way. I'm just using SPS now, once I found that they worked well I just bought a bunch of them.

Ive got one still new in the bag, so I ran the calipers over it to get the feed lip dimensions. Sure enough the 4 I use all the time had spread out a bit.

Did the lips take much work.

My SPS ones are not that flexible.

So if I muck with them without a jig I could wreck them.

Sent from my SM-G935F using Tapatalk

Originally Posted by R93

Did the lips take much work.

My SPS ones are not that flexible.

So if I muck with them without a jig I could wreck them.

Sent from my SM-G935F using Tapatalk

Nah bugger all. Without getting the calipers out to check the actual measurements. The rear of the mag that holds the round in was 10mm which hadn't changed on the used mags. It was only towards the front, the new mag was 11.60ish and the old mags varied out to 12.10mm, so just a gentle tap with a soft head hammer to get them closer to spec.

A bit of a whack then measure, repeat till better or broken.

To be perfectly honest, I haven't had any issues aside from the springs getting tired. It was mainly because I'm doing a full maintenance check on the gun before France, otherwise I wouldn't have bothered.

Originally Posted by Ozzy

Nah bugger all. Without getting the calipers out to check the actual measurements. The rear of the mag that holds the round in was 10mm which hadn't changed on the used mags. It was only towards the front, the new mag was 11.60ish and the old mags varied out to 12.10mm, so just a gentle tap with a soft head hammer to get them closer to spec.

A bit of a whack then measure, repeat till better or broken.

To be perfectly honest, I haven't had any issues aside from the springs getting tired. It was mainly because I'm doing a full maintenance check on the gun before France, otherwise I wouldn't have bothered.

I would have rented ya out my shotty one😆

Cheers for that.

I will have a measure up when I get home but only one has given me issues.

Sent from my SM-G935F using Tapatalk

Originally Posted by R93

I would have rented ya out my shotty one��

Cheers for that.

I will have a measure up when I get home but only one has given me issues.

Sent from my SM-G935F using Tapatalk

Let me know when you have it in front of you and I'll give my mags a measure up to double check what it should be. Those numbers quoted were from 2 days ago, they may or may not be correct, my memory can be rather porous.