Thread: Long shot

Originally Posted by Ozzy

Nah bugger all. Without getting the calipers out to check the actual measurements. The rear of the mag that holds the round in was 10mm which hadn't changed on the used mags. It was only towards the front, the new mag was 11.60ish and the old mags varied out to 12.10mm, so just a gentle tap with a soft head hammer to get them closer to spec.

A bit of a whack then measure, repeat till better or broken.

To be perfectly honest, I haven't had any issues aside from the springs getting tired. It was mainly because I'm doing a full maintenance check on the gun before France, otherwise I wouldn't have bothered.

I would have rented ya out my shotty one😆

Cheers for that.

I will have a measure up when I get home but only one has given me issues.

Sent from my SM-G935F using Tapatalk

Originally Posted by R93

I would have rented ya out my shotty one��

Cheers for that.

I will have a measure up when I get home but only one has given me issues.

Sent from my SM-G935F using Tapatalk

Let me know when you have it in front of you and I'll give my mags a measure up to double check what it should be. Those numbers quoted were from 2 days ago, they may or may not be correct, my memory can be rather porous.