Thread: M40-11 Chaos

Just a wee performance update on the Chaos.

I have fired approx1400 rnds thru it now.

Have had only 2 stoppages both due to reloaded ammo issues.

No primer in one and some hard lube on one of my cast projectiles prevented chambering and in turn the slide returning to battery.

Field stripping and cleaning this gun is a breeze with no tools required to strip or assemble.

The coated barrel (assumption) allows me to shoot cast bullets with little to no fouling and a quick go with a bronze brush and patch has the barrel gleaming.

I clean it roughly every 300 rnds but could probably get away with more before it would lead to a stoppage, due lack of cleaning.

Have had the ejector and rear sight pins wiggle loose during firing but a quick stake with a center punch and some 222 fixed them.

Have had one of my SPS mags put a minor mark/gouge on the internal slide as they were requiring a wee tap to seat and engage the mag catch when full.
2 of them have settled and now hold the advertised 18 rnds and the other 2 need a bit more time.

To say I am so far, wrapped with this gun is an understatement.

With the lifetime warranty and the fact they are made here in NZ, anyone considering a semi custom, standard division gun, may benifit from having a look at one.










Sent from my SM-G900F using Tapatalk