Printable View
Stunning! Springfield 1903 30-06 shiny and bright bore and bore is in excellent condition. $3500 on our website under Robbie's Collection
Attachment 268708
Attachment 268709
Attachment 268710
Attachment 268711
Attachment 268712
Attachment 268713
Attachment 268714
Attachment 268715
Attachment 268716
Attachment 268717
Attachment 268718
Attachment 268719
The Ferguson Breech Loader .65 cal Reproduction $3500 on our website under Robbie's Collections
Attachment 268720
Attachment 268721
Attachment 268721
Ithaca Mag-10 10g shotgun 32" full choke barrel, extremely tidy, hard to find $4000 under Robbie's Collection on our website
3.5" magnum chamber. A few small marks on the barrel and stock as per pics but still in excellent plus condition. Used, not brand new
10g Ammo (federal) easily available in New Zealand we can get it if you need it
Comes with original box and manual
Attachment 268723
Attachment 268724
Attachment 268725
Who made the Ferguson?
Robbie bought it as a kit and the make is Tower, there are more pictures on our website
Call me stupid, but I cant find Robbies collection on your web site?
@johnd yes I didn't see it either straight away but go to https://www.gunworks.co.nz/shop/cate...llectable-guns and it is here
Arisaka Type 38 6.5x52 $1000
Barrel length 31.5"
Bore is bright, shiney and in excellent condition. There is a 8.5" crack in the stock see pic. Found under https://www.gunworks.co.nz/shop/cate...llectable-guns
Attachment 268876
Attachment 268877
Attachment 268878
From memory Robbie brought the kit and another very experienced friend of his did a lot of the work on it.Quote:
Originally Posted by Marty Henry
Malcolm is a great craftsman and Robbie was time poor.
It is a superb example and better than the usual repops
The gent who helped him with it is a Flint and percussion expert.
Quite elderly now but still alive and I could easily find out more
Now this is a sexy piece of kit!
Steyr Mannlicher 1903 6.5x54 with period Khales Scope.
It has an aftermarket cheek piece which as been very well done.
The bore is in very good to excellent condition and the bolt is lovely and smooth, a work of art. $3500 or near offer. More photos under https://www.gunworks.co.nz/shop/cate...llectable-guns
Attachment 268900
Attachment 268902
Attachment 268901
Yes Murray built the Fergusson for Robbie, Murray actually popped over the other day and it was great showing him the Fergy, he was rapt to be able to see it again
Arisaka WWII Japanese fits Type 99 / Type 38 Bayonet, Scabbard, Frog, Kokura Arsenal, Hooked Quillion and blood groove. Under Robbie's collection https://www.gunworks.co.nz/shop/item...illion-1-only-
Attachment 269063
Robbie's Collection for more photos check under https://www.gunworks.co.nz/shop/item...serial-numbers
Lee Enfield SHTLE 1818 303 with matching bolt & receiver serial numbers
Rifle has had wood repairs between the sling studs with fibre glass and wood inletted (not done by Robbie)
The bore is in good condition, has a bit of corrosion but strong rifling
Attachment 269132
Attachment 269134
Attachment 269133
Robbie bought this to build a 50cal but never got the chance to do so, made from wood and possibly laminated but can't be 100% sure https://www.gunworks.co.nz/shop/item...0-sure-1-only- $380
2844 grams
1045mm length including recoil pad
50mm channel
75mm width at the top of the channel
200mm width at bottom of the stock, see pic
Brand new with a few surface scratches from being moved around the shop
Attachment 270474 More photos on the website
Snider 45-60 Winchester Breech Loader $1495 https://www.gunworks.co.nz/shop/item...hester-1-only- $1495
28" barrel
577 Snider sporter rebarreled into 45-60 Winchester, 45-70 Gov't unfortunately is a bit too long for the snider shoe. Barrel was turned to fit inside the internal breeching collar. Barrel is a Pac-nor and being Chro-mo can fire jacketed without issue
Attachment 270490 - more photos on the website
Mauser 98 large ring bolt 8mm mauser or will work in a parker hale safari 8x57, 7x57, 30-06 or 308 rifle. Will also work in any k98 mauser receivers. $380
Attachment 270503
Has a military bolt handle so handle will need bending for scope use and the bolt will also need headspacing into the rifle.
https://www.gunworks.co.nz/shop/item...safari-1-only-
One of Robbie's favourites $1895 https://www.gunworks.co.nz/shop/item...od-70-223-wssm
Winchester Mod 70 223 wssm - rebarreled by Robbie, comes with rings
wssm is winchester super short magnum, this is NOT the same cartridge as 223 rem, see pic
Ammunition available
21" Barrel
Attachment 270505
Attachment 270506
Bet thats got some sting,oocch.
Swedish Mauser 96 small ring bolt $280 https://www.gunworks.co.nz/shop/item...8-bolt-1-only-
Military safety catch removed and slightly longer wing Timney safety catch has been fitted.
The bolt handle has been forged and turned down for scope clearance.
The bolt will also need headspacing into the rifle.
Attachment 270546 more photos on the website
Walther Model 2 22lr unique as its both a bolt action and semi rifle (no magazine) $700 https://www.gunworks.co.nz/shop/item...-model-2-22lr-
1930's German training rifle
Barrel length is 24.5"
Attachment 271271
Attachment 271272
Martini Henry chambered in .577 Snider - unfinished project by Robbie Tiffen ** SOLD ** https://www.gunworks.co.nz/shop/item...nry-577-snider more photos on the website
Barrel is 26" and just needs turning down to complete the project - current weight is just under 5kg but will lighten up once the barrel has been turned down
Attachment 271273
Attachment 271274
Attachment 271275
Remington Lee rebarreled into 45/70 by Robbie Tiffen $1500 more photos on the website https://www.gunworks.co.nz/shop/item...o-4570-1-only-
Barrel length 31.5"
New barrel
Attachment 271284
Lee Enfield BSA Bisley AG Parker Hale Marked 22lr Training Rifle $2500 https://www.gunworks.co.nz/shop/item...-rifle-1-only-
Barrel length 25"
With PH6A Target Sight
First 6" of the bore is quite pitted, rest of the barrel is better but still corroded, still fireable with plenty of rifling.
Attachment 271752
Enfield P14 7x57 Rimmed with Tasco Scope 4-12x40 $595 https://www.gunworks.co.nz/shop/item...4-7x57-rimmed-
Barrel is in mint condition and 20" long
Attachment 271753
