199p
Member

4090 Likes

Page 24 of 273 First ... 101112131415161718192021222324252627282930313233343536373874124 ... Last

• Jump to page:

1. 
   199p liked post by samohtxotom On thread : Cause of split groups?

   Thanks for the all the input fellas very helpful, I've made a bit of a list easiest and cheapest first and started with pulling the stock off - first thing I noticed was the action screws were snug...

   Liked On: 14-03-2024, 12:09 PM

2. 
   199p liked post by outdoorlad On thread : NZ Hunter

   He’d be entertaining at a dinner party after a couple bottles of Red :D :D

   Liked On: 12-03-2024, 12:08 PM

3. 
   199p liked post by Tentman On thread : A long wait . . . 4.5 years!

   Jeez you guys are easy, the first thought of side boob and you want too see the whole thing, luckily I've just put a shot through it to get it on paper and calibrate GRT, there's no way I'd post it...

   Liked On: 11-03-2024, 07:41 PM

4. 
   199p liked post by GregD On thread : NZ Hunter

   I’ve been meaning to answer a couple of the questions, finally found time sitting on the ferry to do it! Firstly, Mountaineering, as Dalts says, you generally don’t rope up unless you are in...

   Liked On: 09-03-2024, 02:38 PM

5. 
   199p liked post by BRADS On thread : 375 Ruger Cases

   Yeah, email Greg at treminator products. I'm pretty sure he has a setup for fire forming as well. Sent from my SM-S916B using Tapatalk

   Liked On: 08-03-2024, 08:43 PM

6. 
   199p liked post by 6.5 CRD On thread : 6.5CM bullet performance

   Same here, ive lost count of how many deer i have shot with the 143 ELDX, its a great killer up close and out far. Found them really easy to get them to shoot in all the rifles i have used them in...

   Liked On: 08-03-2024, 04:14 PM

7. 
   199p liked post by DavieyJones On thread : 7-375 Ruger

   I think i have ended up with one of your 7mm 375 Remington builds. 245452

   Liked On: 08-03-2024, 02:23 PM

8. 
   199p liked post by Makros On thread : Worth while watch for long range wannaby's

   I regularly use my bino harness as a rear bag. Unclip the bottom of the straps and fold it forward tuck it under the but. Find it works quite well. My bino harness is quite a bit more solid than the...

   Liked On: 08-03-2024, 12:02 PM

9. 
   199p liked post by 7mmwsm On thread : Blown suppressor baffle - Launched 20m downrange

   I don't think you are giving DPT fair go, regardless of what you state here. They offered to assess their product to determine the cause of the failure. You declined and decide to modify the...

   Liked On: 05-03-2024, 07:28 PM

10. 
    199p liked post by Wild Hunt On thread : Another spot to tick off the list

    So this trip was towards the end of spring. Having had some luck seeing animals on day trips in the general area I decided an overnighter would probably give me more chance at success. With a couple...

    Liked On: 05-03-2024, 05:38 PM

11. 
    199p liked post by gimp On thread : .223 results

    Since the .223 on Deer thread goes so well, may as well start a .223 handloads thread. I have never done any load development with this rifle before - I just shot the load as provided by Kiwi...

    Liked On: 05-03-2024, 03:58 PM

12. 
    199p liked post by Tahr On thread : Blown suppressor baffle - Launched 20m downrange

    Ive got several DPT's. My .223's fire thousands of rounds. Never maintained them and am thoroughly happy with them. The bit that blew off my magnum one was ordinary wear and tear from hundreds of...

    Liked On: 05-03-2024, 02:24 PM

13. 
    199p liked post by DPT On thread : Blown suppressor baffle - Launched 20m downrange

    Hi all, This discussion perfectly highlights the importance of the maintenance instructions. We engrave on our suppressors: "Read instructions before use." The reason behind this is simple yet...

    Liked On: 05-03-2024, 09:59 AM

14. 
    199p liked post by STC On thread : Blown suppressor baffle - Launched 20m downrange

    Its not just suppressor development that has stalled sadly.

    Liked On: 05-03-2024, 09:16 AM

15. 
    199p liked post by Fisherman On thread : Carbon stock for a Tikka

    Cheers for all the good feedback guys...I work for Rivers to Ranges now. Carbon finish is available now. They are weighing in at about 500-510 grams with a microcell recoil pad or 550gm with the...

    Liked On: 05-03-2024, 08:07 AM

Page 24 of 273 First ... 101112131415161718192021222324252627282930313233343536373874124 ... Last

• Jump to page: