25/08IMP
Member

584 Likes

Page 31 of 39 First ... 1718192021222324252627282930313233343536373839 Last

• Jump to page:

1. 
   199p liked post by 25/08IMP On thread : Bino Harness

   Thanks Philipo I've just checked them out on you tube these look the business and still have straps to hold them. Sent from my SM-G900I using Tapatalk

   Liked On: 03-01-2017, 08:06 AM

2. 
   Maca49 liked post by 25/08IMP On thread : My first F up

   If you are priming with your press just use your size die and push it out put safety glasses on as Ryan said but is safe I've done it a few times. As for the crimp i have used my deburing tool which...

   Liked On: 28-12-2016, 12:41 PM

3. 
   HNTMAD liked post by 25/08IMP On thread : 2016 Sign Off

   awesome stuff some great memories there.

   Liked On: 24-12-2016, 07:37 PM

4. 
   199p liked post by 25/08IMP On thread : Vari power thoughts

   I have 2 Z5 Swarovski 3.5 x 18 BT one is on my .260AI awesome scopes and my son has Z3 3 x 10 which is also a great scope and a little more compact. Sent from my SM-G900I using Tapatalk

   Liked On: 20-12-2016, 08:49 PM

5. 
   Pixie Z liked post by 25/08IMP On thread : Finally got there... Again

   Great stuff a well deserved deer Sent from my SM-G900I using Tapatalk

   Liked On: 18-12-2016, 11:11 PM

6. 
   Pengy liked post by 25/08IMP On thread : Hand prime or Bench prime

   If you want a Lee hand primer tool I have one with large and small trays $30 to you door none rural Sent from my SM-G900I using Tapatalk

   Liked On: 28-11-2016, 12:08 PM

7. 
   Mathias liked post by 25/08IMP On thread : 6.5 x 55 (T3) 143g eldx 7828ssc ladder test

   Bloody good speed BRADS from a standard .260. Sent from my SM-T350 using Tapatalk

   Liked On: 12-11-2016, 04:47 PM

8. 
   Uplandstalker liked post by 25/08IMP On thread : 260AI

   http://uploads.tapatalk-cdn.com/20161102/80b83f5e6949845729a96f38702830d5.jpg Went to the range to check the .260AI using the 143grn ELDX and Hodgdon Superformance only fired 3 shot as I'm a tight...

   Liked On: 06-11-2016, 05:10 PM

9. 
   GWH liked post by 25/08IMP On thread : 260AI

   http://uploads.tapatalk-cdn.com/20161102/80b83f5e6949845729a96f38702830d5.jpg Went to the range to check the .260AI using the 143grn ELDX and Hodgdon Superformance only fired 3 shot as I'm a tight...

   Liked On: 03-11-2016, 01:10 PM

10. 
    R93 liked post by 25/08IMP On thread : 260AI

    I seems to shoot well for me in both rifles which is good. Sent from my SM-G900I using Tapatalk

    Liked On: 03-11-2016, 12:34 PM

11. 
    Mathias liked post by 25/08IMP On thread : 260AI

    http://uploads.tapatalk-cdn.com/20161102/80b83f5e6949845729a96f38702830d5.jpg Went to the range to check the .260AI using the 143grn ELDX and Hodgdon Superformance only fired 3 shot as I'm a tight...

    Liked On: 03-11-2016, 11:24 AM

12. 
    Pengy liked post by 25/08IMP On thread : 260AI

    http://uploads.tapatalk-cdn.com/20161102/80b83f5e6949845729a96f38702830d5.jpg Went to the range to check the .260AI using the 143grn ELDX and Hodgdon Superformance only fired 3 shot as I'm a tight...

    Liked On: 03-11-2016, 11:15 AM

13. 
    veitnamcam liked post by 25/08IMP On thread : Mclay B 1800

    I guess it depends on where you are fishing we do a lot of bar crossings with dive gear and you need the power but if you are on lakes or inshore it may be fine. I think a bigger motor not working...

    Liked On: 29-10-2016, 04:22 PM

14. 
    veitnamcam liked post by 25/08IMP On thread : Mclay B 1800

    I had the B1600 as my first boat and ran a 90hp on it a great boat there are a couple of B1800 and B2000 still around up here most run a 135 or 150 on the 1800. Yes they are getting old and most...

    Liked On: 29-10-2016, 04:21 PM

15. 
    puku liked post by 25/08IMP On thread : Mclay B 1800

    I guess it depends on where you are fishing we do a lot of bar crossings with dive gear and you need the power but if you are on lakes or inshore it may be fine. I think a bigger motor not working...

    Liked On: 29-10-2016, 12:40 PM

Page 31 of 39 First ... 1718192021222324252627282930313233343536373839 Last

• Jump to page: