25/08IMP
Member

584 Likes

Page 1 of 39 123456789101112131415 ... Last

• Jump to page:

1. 
   7mmsaum liked post by 25/08IMP On thread : Sako finnlight 2

   So you can get one in 7mmsaum then. Sent from my SM-G900I using Tapatalk

   Liked On: 03-09-2024, 12:02 AM

2. 
   chainsaw liked post by 25/08IMP On thread : The sooper dooper pig 300wsm project thread

   I run the 178 ELDX in my mates WSM using Hodgdon superprofrmance around 2900 and something from a 20" Sent from my CPH2145 using Tapatalk

   Liked On: 28-08-2024, 10:28 PM

3. 
   rewa liked post by 25/08IMP On thread : tight closing the bolt

   Another thought just try and chamber an unprimed empty but sized case I have had some cases where the primer wasn't seated deep enough so if you try a sized but unprimed it can eliminate a few...

   Liked On: 21-08-2023, 08:40 PM

4. 
   GSP HUNTER liked post by 25/08IMP On thread : 270 in a 20in barrel or 308 in 18in barrel

   .270 and shoot 145 eldx at around 3k just cut the thread off and rethread and use your .308 surppressor. Sent from my CPH2145 using Tapatalk

   Liked On: 08-08-2022, 11:36 AM

5. 
   caberslash liked post by 25/08IMP On thread : 270 in a 20in barrel or 308 in 18in barrel

   .270 and shoot 145 eldx at around 3k just cut the thread off and rethread and use your .308 surppressor. Sent from my CPH2145 using Tapatalk

   Liked On: 07-08-2022, 09:00 PM

6. 
   matagouri liked post by 25/08IMP On thread : Rifles that don't age well

   I sent it to Murfs precision https://uploads.tapatalk-cdn.com/20220805/a307702998ab56ca74a99c8c5c315ec4.jpghttps://uploads.tapatalk-cdn.com/20220805/c3a52f7af3c9fc857c9814aeb5bc2dcb.jpg Sent from...

   Liked On: 05-08-2022, 08:50 PM

7. 
   dannyb liked post by 25/08IMP On thread : Rifles that don't age well

   I sent it to Murfs precision https://uploads.tapatalk-cdn.com/20220805/a307702998ab56ca74a99c8c5c315ec4.jpghttps://uploads.tapatalk-cdn.com/20220805/c3a52f7af3c9fc857c9814aeb5bc2dcb.jpg Sent from...

   Liked On: 05-08-2022, 08:40 PM

8. 
   Moa Hunter liked post by 25/08IMP On thread : 270 in a 20in barrel or 308 in 18in barrel

   .270 and shoot 145 eldx at around 3k just cut the thread off and rethread and use your .308 surppressor. Sent from my CPH2145 using Tapatalk

   Liked On: 05-08-2022, 05:56 PM

9. 
   199p liked post by 25/08IMP On thread : Rifles that don't age well

   I've just had my carbon light stock recoated as it did the same. It's come back better than new. Sent from my CPH2145 using Tapatalk

   Liked On: 05-08-2022, 05:41 PM

10. 
    tetawa liked post by 25/08IMP On thread : 270 in a 20in barrel or 308 in 18in barrel

    .270 and shoot 145 eldx at around 3k just cut the thread off and rethread and use your .308 surppressor. Sent from my CPH2145 using Tapatalk

    Liked On: 05-08-2022, 04:17 PM

11. 
    veitnamcam liked post by 25/08IMP On thread : R26 and carbon

    Best carbon cleaner i found is the Gunslick forming one i use it after each outing. No more carbon build up Sent from my CPH2145 using Tapatalk

    Liked On: 03-08-2022, 06:57 PM

12. 
    199p liked post by 25/08IMP On thread : Hornady Shipment

    Sounds like the latest Hornady Shipment has arrived. Sent from my CPH2145 using Tapatalk

    Liked On: 03-08-2022, 05:24 PM

13. 
    MB liked post by 25/08IMP On thread : Hornady Shipment

    Sounds like the latest Hornady Shipment has arrived. Sent from my CPH2145 using Tapatalk

    Liked On: 03-08-2022, 05:03 PM

14. 
    RugerM77 liked post by 25/08IMP On thread : KNIFE SHARPENING SYSTEM ADVICE PLSE

    Same here my kids brought me one for my birthday they are awesome. Sent from my CPH2145 using Tapatalk

    Liked On: 29-07-2022, 09:01 PM

15. 
    Ftx325 liked post by 25/08IMP On thread : KNIFE SHARPENING SYSTEM ADVICE PLSE

    Same here my kids brought me one for my birthday they are awesome. Sent from my CPH2145 using Tapatalk

    Liked On: 29-07-2022, 07:14 PM

Page 1 of 39 123456789101112131415 ... Last

• Jump to page: