New 7mmSAUM build... All parts sorted by Cam wsm from alpine precision. Manners ultralight stock Defiance deviant ultralight action Bartlein 22inch fluted barrel Hardy magnum supresser ...
Liked On: 03-04-2020, 09:10 PM
Rem 700 - 22" in Bell and Carlson stock.
Liked On: 29-03-2020, 08:29 PM
Mate use to run an 18" 243. 80gr barnes ttsx or nosler 80gr flat base. Smashed sika
Liked On: 29-03-2020, 03:46 PM
Ran an 18" T3 with 85 Sierra hp at 3100 then switched to a dual load :95 VLD at 3000 and 95 SST at 2950. Stiff loads of 2209. All three killers on Fallow, Reds and Tahr. My current 243 is...
Liked On: 29-03-2020, 03:46 PM
Probably a more than its worth
Liked On: 03-03-2020, 06:15 PM
Have a look at this clip it shows the 135 grain bullet leaving a fairly good hole in a pronghorn at nearly 700 yards https://www.youtube.com/watch?v=_EjzRixnBC0 . I think they work okay. I would be...
Liked On: 02-02-2020, 10:00 AM
Speak up man. Complaining on the Internet won't achieve much.
Liked On: 25-01-2020, 09:17 AM
Factory Remington Defense M24, not a clone. Chambered in 7.62 NATO, correct as issued Harris Bi-pod, Mark 4 steel med 30mm rings, and Mark 4 3.5-10x40 TMR Illuminated scope with M3 turrets. ...
Liked On: 20-01-2020, 10:53 AM
So much temptation.... Must not give in [emoji51] Sent from my SM-N975F using Tapatalk
Liked On: 08-01-2020, 07:05 PM
Lab then?
Liked On: 03-01-2020, 08:57 AM
Couple photes of my sako L46 in Mack IV, just cause.126422126423
Liked On: 19-12-2019, 10:18 AM
Leave it alone and just go hunting. It's accurate enough for 99% of hunting situations. Chop the barrel and recrown if you want.
Liked On: 01-11-2019, 06:47 AM
Heres a M40A5 clone, well kind of... Scope is new. Barrel profile & rifling is M40 correct, as are rings & DBM. Stock has incorrect cheek riser otherwise correct, and i went for a more practicle...
Liked On: 29-10-2019, 04:34 PM
Barnes TTSX 130gr
Liked On: 26-08-2019, 02:00 PM
300_BLK, that would be good for the NI big bore shoot in Taranaki at the end of the month... :thumbsup:
Liked On: 12-08-2019, 07:32 AM