38 South
Member

111 Likes

Page 6 of 8 First 12345678 Last

• Jump to page:

1. 
   caberslash liked post by 38 South On thread : Burris Signature HD now in NZ

   So I did a once around a 4 inch square track at 100 yds; 16 up, 16 right, 16 down, 16 left and back to the exact point where I started, corners were all true, so I guess that's at least a preliminary...

   Liked On: 17-10-2020, 08:01 PM

2. 
   Mathias liked post by 38 South On thread : Burris Signature HD now in NZ

   So I did a once around a 4 inch square track at 100 yds; 16 up, 16 right, 16 down, 16 left and back to the exact point where I started, corners were all true, so I guess that's at least a preliminary...

   Liked On: 17-10-2020, 05:17 PM

3. 
   Moa Hunter liked post by 38 South On thread : Burris Signature HD now in NZ

   One of my sons bought a 3-15 illuminated a couple of weeks back, it seems to tick most boxes; reticle is suitable for most things, illumination and its control system are good, zero stop system is...

   Liked On: 17-10-2020, 04:22 PM

4. 
   superdiver liked post by 38 South On thread : Burris Signature HD now in NZ

   One of my sons bought a 3-15 illuminated a couple of weeks back, it seems to tick most boxes; reticle is suitable for most things, illumination and its control system are good, zero stop system is...

   Liked On: 17-10-2020, 06:47 AM

5. 
   Ryan_Songhurst liked post by 38 South On thread : Burris Signature HD now in NZ

   One of my sons bought a 3-15 illuminated a couple of weeks back, it seems to tick most boxes; reticle is suitable for most things, illumination and its control system are good, zero stop system is...

   Liked On: 17-10-2020, 04:29 AM

6. 
   scottrods liked post by 38 South On thread : Tikka T3 barrel on a older M595

   AFAIK, Tikka M55/65, M590/595, 690/695, T3, Sako 75/85 and probably more (Tikka/Sako) are all interchangeable - with headspace checked.

   Liked On: 02-09-2020, 12:13 PM

7. 
   veitnamcam liked post by 38 South On thread : Economics of old trucks vs new trucks

   Not so sure that a hunting and shooting forum website is the best place to find out about trucks and towing but a couple of things of interest; modern auto transmissions are not anything like their...

   Liked On: 23-08-2020, 07:23 AM

8. 
   norsk liked post by 38 South On thread : Economics of old trucks vs new trucks

   Not so sure that a hunting and shooting forum website is the best place to find out about trucks and towing but a couple of things of interest; modern auto transmissions are not anything like their...

   Liked On: 19-07-2020, 04:31 AM

9. 
   Klhari liked post by 38 South On thread : What thread for suppressor

   1/2" 28 TPI or 1/2" 20 TPI either is okay, thread root diameter for 1/2" 28 should be slightly bigger leaving more meat between the bore and the thread root. DPT will tell you anyway.

   Liked On: 13-07-2020, 11:17 PM

10. 
    Timmay liked post by 38 South On thread : What thread for suppressor

    1/2" 28 TPI or 1/2" 20 TPI either is okay, thread root diameter for 1/2" 28 should be slightly bigger leaving more meat between the bore and the thread root. DPT will tell you anyway.

    Liked On: 13-07-2020, 09:08 PM

11. 
    DPT liked post by 38 South On thread : What thread for suppressor

    1/2" 28 TPI or 1/2" 20 TPI either is okay, thread root diameter for 1/2" 28 should be slightly bigger leaving more meat between the bore and the thread root. DPT will tell you anyway.

    Liked On: 13-07-2020, 09:02 PM

12. 
    rugerman liked post by 38 South On thread : Which gun for small vermin?

    I've got a Ruger 10/22 that I've had since the late 70's when I was doing coons for a living, mine was always surprisingly accurate but in later years after a lot of use it's accuracy declined. This...

    Liked On: 29-06-2020, 10:13 PM

13. 
    stagstalker liked post by 38 South On thread : Talley 30mm Rings Torque specs Tikka

    Not wishing to start a war here but using epoxy adhesives and the likes between scope rings and bases is at least questionable and in defiance of the engineering design of both the rifle and the...

    Liked On: 25-06-2020, 10:55 AM

14. 
    Boar Freak liked post by 38 South On thread : Uruwera Sika

    Through the 80's we used to regularly see them close to Plateau hut, maybe 8 or 10 some days, they weren't the target species so we left them alone except for a spiker that collided with a .223...

    Liked On: 04-05-2020, 10:57 PM

15. 
    wire hunter liked post by 38 South On thread : Advice for new 223

    I've got a stainless steel Model 7 in .223 that I've had for about 20 years and it's an awesome little gun, it's had the trigger worked , 1/2 cock added to the action (not to hunt with the gun on...

    Liked On: 23-04-2020, 09:53 PM

Page 6 of 8 First 12345678 Last

• Jump to page: