40mm
Member

3328 Likes

Page 5 of 222 First 1234567891011121314151617181955105 ... Last

• Jump to page:

1. 
   40mm liked post by SixtyTen On thread : 22lr Resizing/Hollow Pointing Tool

   Hey Folks, I have been working on a 22lr resizing / hollow pointing tool. What I have made is basically a direct copy of the Neal Waltz die, with a couple of minor changes. His design is by far the...

   Liked On: 25-05-2024, 01:08 PM

2. 
   40mm liked post by Maca49 On thread : .600 Nitro

   I had one in my hands the other week, serial number was “1”, very rare and very expensive. First one to be made for this round.

   Liked On: 22-05-2024, 11:02 AM

3. 
   40mm liked post by akaroa1 On thread : .600 Nitro

   Even when a clear mental health condition was a precursor ? You would clearly have to be mad

   Liked On: 22-05-2024, 11:02 AM

4. 
   40mm liked post by akaroa1 On thread : .600 Nitro

   Loaded factory ammo looks to go about $50 US to $70 US PER ROUND So $100 to 150 NZ PER ROUND That's probably cheap compared to the costs involved with the broken collar bone

   Liked On: 22-05-2024, 11:02 AM

5. 
   40mm liked post by akaroa1 On thread : .600 Nitro

   Yeah nah. Not for me guys But a quick crunch of the numbers Jeffery 16 pound 600 Double, 900 grain projectile, 1900 FPS EQUALS 110 to 120 Foot Pounds of recoil The 577 3" BPE I'm building...

   Liked On: 22-05-2024, 11:01 AM

6. 
   40mm liked post by No.3 On thread : .600 Nitro

   Where's 40mm when we are talking about obscene powder charges haha

   Liked On: 22-05-2024, 11:01 AM

7. 
   40mm liked post by grandpamac On thread : .600 Nitro

   That wimpy thing. Not a patch on the 700 Nitro that came out a few years back. Regarding the 600 nitro if you have to ask how much the ammo costs you can't afford it. It fires a 900 grain projectile...

   Liked On: 22-05-2024, 11:01 AM

8. 
   40mm liked post by Boxton On thread : Another Vintage project and what happens when .....

   Someone. Cough cough... With a significantly heavier frame in the shoulder area... Cough cough... Could test it for you Just saying

   Liked On: 20-05-2024, 06:55 PM

9. 
   40mm liked post by akaroa1 On thread : Another Vintage project and what happens when .....

   First thing I did in the conversion process is solder on a period correct front sling eye This needs to be done before the liner is fitted an epoxied into the barrel 248723 Now wait for a...

   Liked On: 20-05-2024, 06:55 PM

10. 
    40mm liked post by akaroa1 On thread : Another Vintage project and what happens when .....

    Sadly a Nitro cylinder bore 16 gauge shotgun under 5 pounds is of no use to anyone I knew that when i brought it But was curious to see if ( as it looked ) it was built on the same frame as my...

    Liked On: 20-05-2024, 06:55 PM

11. 
    40mm liked post by akaroa1 On thread : Another Vintage project and what happens when .....

    Group at 50 yards was under 4" and well low of point of aim 248719

    Liked On: 20-05-2024, 06:54 PM

12. 
    40mm liked post by akaroa1 On thread : Another Vintage project and what happens when .....

    So what use is a mint vintage nitro proofed 16 gauge shotgun ( to a rifle guy ) that only weighs 4 3/4 pounds ? Actually not much ! It came with half a box of Winchester 16 gauge 3/4 oz solid...

    Liked On: 20-05-2024, 06:53 PM

13. 
    40mm liked post by akaroa1 On thread : Another Vintage project and what happens when .....

    So the Vintage Rifle scene has been pretty quiet on the forum lately and it falls to me to stir things up So what happens when that crazy old rifle guy ( old rifle not old guy ? ) buys a SHOTGUN ...

    Liked On: 20-05-2024, 06:52 PM

14. 
    40mm liked post by DemocKot On thread : Suzuki Jimny

    I have 2022 Jimny FYI economy is 10l per 100km,lots of off road 11.5 has 235 75r15 and roof racks lift kit diff locks underbody protection,winch etc...yes asthmatic on open road with those mods But I...

    Liked On: 08-05-2024, 02:33 PM

15. 
    40mm liked post by 7mmsaum On thread : Suzuki Jimny

    Great machine Very reliable and capable 4wd Used small tractor tyres on ours off-road

    Liked On: 08-05-2024, 02:19 PM

Page 5 of 222 First 1234567891011121314151617181955105 ... Last

• Jump to page: