6.5 CRD
Member

366 Likes

Page 12 of 25 First 12345678910111213141516171819202122232425 Last

• Jump to page:

1. 
   6.5 CRD liked post by Doon On thread : Some thoughts on 6.5 PRC

   Superformance works well for me in the PRC but being a double based powder I backed off a bit for that reason. Theres no such thing as a free lunch. As stated before every rifle is different.

   Liked On: 22-06-2023, 11:54 AM

2. 
   6.5 CRD liked post by Pommy On thread : Some thoughts on 6.5 PRC

   Remember to tune GRT with your real world chrono numbers via the OBT tool. Can't help but think you must be wringing the piss out of your Creedmoor, if you're getting over 2900. I'm getting...

   Liked On: 22-06-2023, 11:31 AM

3. 
   6.5 CRD liked post by Doon On thread : Could any quickload experts run a simulation for me?

   Dont really understand why you would rebarrel a 223 to 222 and run long bullets! In grt you would be lucky to get 2600-2700 and I dont think your brass woud last very long.

   Liked On: 21-06-2023, 05:23 PM

4. 
   6.5 CRD liked post by T.FOYE On thread : Lapua 6.5 PRC Brass - Split Necks

   I would think it's just a bad batch. I do my brass on the amp every cycle and I've never once seen a crack on a single neck. Gotta be the quality of the brass surely

   Liked On: 21-06-2023, 06:44 AM

5. 
   6.5 CRD liked post by NathanSBR On thread : Some thoughts on 6.5 PRC

   Although, you also have to remember that that square relationship between energy and velocity works back in your favour downrange when you bullet impacts... A bullet going 2x faster is going to...

   Liked On: 21-06-2023, 06:25 AM

6. 
   6.5 CRD liked post by NathanSBR On thread : Some thoughts on 6.5 PRC

   You have to remember that energy is proportional to the square of velocity so it takes 4x as much energy to generate 2x the velocity. Powder is a form of stored energy (in the chemical bonds). Plus...

   Liked On: 21-06-2023, 06:25 AM

7. 
   6.5 CRD liked post by kiwi303 On thread : Some thoughts on 6.5 PRC

   We like shorter barrels here which is a major part in why some of our velocities when comparing standard to magnum cartridges aren't giving a heap of speed difference. The PRC starts to really...

   Liked On: 21-06-2023, 06:24 AM

8. 
   6.5 CRD liked post by 7mm tragic On thread : Some thoughts on 6.5 PRC

   Hornady data suggests 3150 with a max load of RL26 behind a 143 eldx. Im yet to see one even come close to that. Sent from my iPhone using Tapatalk[/QUOTE] My sierra manual lists a max...

   Liked On: 19-06-2023, 05:49 AM

9. 
   6.5 CRD liked post by mikee On thread : Some thoughts on 6.5 PRC

   6.5PRC was (like 6.5 Creedmore) brought about to sell more new rifles / compnents. Gun writers jumped on it (earned their money) and promoted the hell out of it and made it the cool calibre to...

   Liked On: 18-06-2023, 05:38 PM

10. 
    6.5 CRD liked post by Kelton On thread : Some thoughts on 6.5 PRC

    Yea i find it an underperformer inherently accurate and cool theirs factory top quality ammo 6.5 saum leaves it for dead 156 berger 3080 22" bbl . The prc range has being a god sent for the non...

    Liked On: 18-06-2023, 05:37 PM

11. 
    6.5 CRD liked post by chainsaw On thread : Some thoughts on 6.5 PRC

    I agree with mikee - the primary purpose of the 6.5 PRC was to allow the Hornady marketing machine to prop up the bank balance. And build on their Creedmore 6.5 theme. The 6.5 PRC offers little or...

    Liked On: 18-06-2023, 05:37 PM

12. 
    6.5 CRD liked post by Mathias On thread : Some thoughts on 6.5 PRC

    In terms of economics in these days of limited availability of slow powders e.g RL26, the 6.5CM & 260 are a better choice for higher volume shooting. As mentioned the velocity returns per grains of...

    Liked On: 18-06-2023, 12:42 PM

13. 
    6.5 CRD liked post by Micky Duck On thread : 300wsm advice

    this is same thing Im saying about resistance and/or aiming point...... the softer projectile or the higher speed mean you need to adjust aim to a softer target/shallower vitals.....plenty of guys on...

    Liked On: 18-06-2023, 11:25 AM

14. 
    6.5 CRD liked post by buzzman On thread : Some thoughts on 6.5 PRC

    I found the same thing at start thought the prc was going to be the best thing out but now shooting a 260 st same speeds Sent from my iPhone using Tapatalk

    Liked On: 18-06-2023, 11:15 AM

15. 
    6.5 CRD liked post by gqhoon On thread : Some thoughts on 6.5 PRC

    From a reloaders perspective, I think the 6.5PRC has been let down / hamstrung by a lack of collective input and agreement from factory rifle manufacturers, brass manufactures and sizing die...

    Liked On: 18-06-2023, 10:20 AM

Page 12 of 25 First 12345678910111213141516171819202122232425 Last

• Jump to page: