7 SAUM brass is basically unobtainium. It's a cartridge often used for F-Open and brass availability is now a nightmare. As long as brass becomes commonly available, the 7 PRC looks a good option for...
Liked On: 05-05-2023, 01:54 PM
https://bulletin.accurateshooter.com/2023/05/democrats-push-legislation-to-ban-and-confiscate-suppressors/ Lots of logic in that
Liked On: 03-05-2023, 10:12 AM
My contact who lives near Cork has shot a -lot- of sika there and says most land is private but there is still some accessible public land. One thing's for sure- it's damn wet there so you need good...
Liked On: 27-04-2023, 11:40 PM
I wouldn't want to torture the members with extra pics of the powder/proj stocks :) Yeh, we had a good time. S Africa is def on the decline but it's still interesting for us Kiwis. Knocking over a...
Liked On: 20-04-2023, 09:01 AM
I wouldn't want to torture the members with extra pics of the powder/proj stocks :) Yeh, we had a good time. S Africa is def on the decline but it's still interesting for us Kiwis. Knocking over a...
Liked On: 19-04-2023, 11:07 PM
Here's what was on the shelf of a Sth African hunting shop last week 221631 The guys said their four other outlets had even greater stock
Liked On: 19-04-2023, 11:06 PM
If you can't track down the bits, get someone to turn up a spacer washer that goes under the turret cap. Takes a slight bit of measuring up but acts as a zero stop.
Liked On: 17-04-2023, 11:30 AM
If you can't track down the bits, get someone to turn up a spacer washer that goes under the turret cap. Takes a slight bit of measuring up but acts as a zero stop.
Liked On: 17-04-2023, 09:37 AM
Yeh, I run across tough ones too at times and it doesn't seem related to the treatment the carcase gets which the same each time. I once thought it might be adrenaline from being chased prior to...
Liked On: 20-02-2023, 10:32 AM
Yeh, I run across tough ones too at times and it doesn't seem related to the treatment the carcase gets which the same each time. I once thought it might be adrenaline from being chased prior to...
Liked On: 20-02-2023, 07:41 AM
-Any- length .223 barrel is way past the safe zone for hearing unsuppressed. 14.5" is damn short and I'd guess it's the shortest you'd go without excessive loss of velocity. Clearly portability was a...
Liked On: 14-02-2023, 08:07 AM
Believe me, it doesn't matter what fancy bore cleaner you use, if it's just using patches, there's no guarantee the bore will end up fully clean even when the patch comes out spotless. This is...
Liked On: 12-02-2023, 11:30 PM
When it comes to bluing, Alan Carr is your man. Pissing round with nasty chemicals when you're learning isn't the best.
Liked On: 10-02-2023, 11:39 AM
Drop is really not an issue with a RF so the main consideration is wind drift. At 600yds, the numbers with a 143 ELD-X (2700 v 2900) are 22.9 v 20.8. I wouldn't call 2" a massive difference, 6" maybe.
Liked On: 09-02-2023, 05:37 PM
Drop is really not an issue with a RF so the main consideration is wind drift. At 600yds, the numbers with a 143 ELD-X (2700 v 2900) are 22.9 v 20.8. I wouldn't call 2" a massive difference, 6" maybe.
Liked On: 09-02-2023, 05:28 PM