I use the 150BTs in my 7mmRM (MV 3160fps) and have never had any issue with a lack of penetration.
Liked On: 30-03-2020, 07:22 PM
As you can see from the solid base on the NBT's they are a decent bullet, even if they do expand alot in the front half the base will generally always hold together and carry on and penatrate through.
Liked On: 30-03-2020, 07:22 PM
55gr GMX Or anything made by Barnes
Liked On: 30-03-2020, 01:03 PM
I know you can get better glass by going non rangefinding binos but since having my Geovids I will never go back to the separate rangefinder combo. It’s just so much better having it all in one.
Liked On: 29-03-2020, 03:19 PM
Got this one finished up and load sorted for the customer before the whole COVID 19 hit luckily, another build by Dean Maisey and is the second build for this customer :cool: He also managed to...
Liked On: 29-03-2020, 02:53 PM
I'm bored so just timed myself doing ten rounds through the mighty hornady auto charge They were weighed to .1g and while the powder was filling the pan I was seating the bullet before. It worked...
Liked On: 28-03-2020, 10:35 PM
The nxs is old but very good technology. Comparing an nx8 and the z8i is more apples and apples. The night force mantra is rugged reliable and repeatable. There is a cost to that of weight but if...
Liked On: 28-03-2020, 10:22 PM
16inch probably ideal handling wise. I had 18inch 308 was still bit lumpy with the can on. I prefer bare rifles now at factory length though am bound to change my mind again
Liked On: 28-03-2020, 08:50 PM
Day 3 : one guy goes fishing Day 4 : neighbour saw him yesterday, goes out as well - takes his kid along Day 5 : another neighbor sees all of this and invites his 3 cousins - "everyone is out...
Liked On: 25-03-2020, 10:12 PM
133740 133741 133742
Liked On: 24-03-2020, 09:07 PM
Yeah, he is a bit suspect when it comes to zeroing rifles, and even more so when it comes to holdover on targets. You never quite know with that one....:P
Liked On: 24-03-2020, 08:38 PM
I don't no flip flop and his edge shot this lot in about 2 minutes.....but then that was the only time I've ever seen it sighted...
Liked On: 24-03-2020, 08:29 PM
Yes. I'm measuring my ogive. I'll do the first handful then check every 5th or so after. I've not struck much problems and I don't load closer than 0.010" typically not have I needed to....
Liked On: 21-03-2020, 02:57 PM
OK I think I may have cracked it. I have bought new brass, new powder and new pills. Measuring for OAL to the lands with the new bullet I figured I'd re-check my original measurement with the 150NBT....
Liked On: 21-03-2020, 07:59 AM
Here's some pics from 143eld-x damage. Never had a walk off yet. I find them very confidence inspiring for new shooters one less thing for me to worry about....
Liked On: 20-03-2020, 11:45 AM