7x64
Member

221 Likes

Page 3 of 15 First 123456789101112131415 Last

• Jump to page:

1. 
   Sarvo liked post by 7x64 On thread : QD Rings

   Warne seem to suggest they go on the right - at least they do on those that have a tapered dovetail like CZ.

   Liked On: 06-06-2020, 12:41 PM

2. 
   stevodog liked post by 7x64 On thread : 6.5x55 new barrel or new gun

   What makes you say the barrel is worn out? Have you considered cutting the last inch or two or back boring it to see if that helps? If you’re going to remove it then nothing to lose - you might be...

   Liked On: 09-04-2020, 11:19 AM

3. 
   johnino liked post by 7x64 On thread : 6.5x55 new barrel or new gun

   What makes you say the barrel is worn out? Have you considered cutting the last inch or two or back boring it to see if that helps? If you’re going to remove it then nothing to lose - you might be...

   Liked On: 09-04-2020, 11:10 AM

4. 
   dannyb liked post by 7x64 On thread : Cratered Primer

   Note also federal brass is often thicker than most brands, so book max plus federal is possibly getting into overload territory. Does look like an ejector stamp so time to back off I’d say.

   Liked On: 08-04-2020, 02:57 PM

5. 
   7mmsaum liked post by 7x64 On thread : 7mm sectioned projectiles

   134908 162 Amax, in case someone hasn’t done one yet.

   Liked On: 05-04-2020, 08:14 AM

6. 
   winaa liked post by 7x64 On thread : 7mm sectioned projectiles

   134908 162 Amax, in case someone hasn’t done one yet.

   Liked On: 03-04-2020, 09:51 PM

7. 
   jakewire liked post by 7x64 On thread : Rings for Sakos

   Yup, take garyp up in his offer. He did just that for me - sadly didn’t fit, but genuine good bugger and can’t get more helpful than that.

   Liked On: 28-08-2019, 08:43 PM

8. 
   Tommy liked post by 7x64 On thread : Rings for Sakos

   Yup, take garyp up in his offer. He did just that for me - sadly didn’t fit, but genuine good bugger and can’t get more helpful than that.

   Liked On: 28-08-2019, 07:17 PM

9. 
   oraki liked post by 7x64 On thread : Mountain Biking Noob

   If you have an Evo cycles near by see if they can get you a Silverback Spectre Sport. Around the 800 mark but a lot of bike for the money. But yes, brand isn’t too important, look at specs. Lots to...

   Liked On: 26-06-2019, 01:29 PM

10. 
    veitnamcam liked post by 7x64 On thread : Last of the Summer Wine Forum Hunt

    Can you change the thread title - wouldn’t have picked this was what it was about. Will be keeping an eye on this as sounds brilliant!

    Liked On: 10-03-2019, 08:46 PM

11. 
    Tussock liked post by 7x64 On thread : Last of the Summer Wine Forum Hunt

    Can you change the thread title - wouldn’t have picked this was what it was about. Will be keeping an eye on this as sounds brilliant!

    Liked On: 10-03-2019, 08:43 PM

12. 
    xtightg liked post by 7x64 On thread : Are these electronic ear muffs ok? $45 in GC sale

    Peltors off Amazon, not dear at all.

    Liked On: 04-03-2019, 10:17 PM

13. 
    Sideshow liked post by 7x64 On thread : RCBS or Lee

    The two you mention are both low end. Treated with care they will last, but as a beginner you often strain them more than once you know what you’re doing and have learnt a few tricks. Much of a...

    Liked On: 23-02-2019, 09:05 PM

14. 
    bully liked post by 7x64 On thread : Q1 COAL ...a novice reloader question.

    Knowing what the factory powder is how exactly? I wouldn’t recommend this. Also, a lot of factory ammo is crimped, so a bugger to pull. Shoot and start again as suggested.

    Liked On: 23-02-2019, 06:13 PM

15. 
    veitnamcam liked post by 7x64 On thread : Do i need a 300 win mag?

    And of course the op needs a 300 win mag. Just don’t buy a tikka, it only encourages them to import more of the bloody things...

    Liked On: 17-02-2019, 03:10 PM

Page 3 of 15 First 123456789101112131415 Last

• Jump to page: