AH89
Member

18 Likes

Page 1 of 2 12 Last

• Jump to page:

1. 
   AH89 liked post by Tentman On thread : 6mm ARC (and it's cousins) load data

   Tried some ladders this arvo, wind was piping, making shooting OWC groups too much of a lottery. All with 103 EldXs in Starline brass with Fed 205s COL of 59.5 Started with H4895/2206H 0.3 gn...

   Liked On: 07-08-2023, 11:51 AM

2. 
   AH89 liked post by Tentman On thread : 6mm ARC (and it's cousins) load data

   Down here in good old NZ we are unique in having a majority share of 6mm ARC bolt guns . ... elsewhere it's mostly ARs which operate at significantly less snot. The 6 ARC is very similar to 6mm...

   Liked On: 06-08-2023, 05:40 PM

3. 
   AH89 liked post by Gkp On thread : Some thoughts on 6.5 PRC

   The 7mm saum on the left will spit out a 168 grain pill at the same speed as the prc with a 147 227260

   Liked On: 05-08-2023, 09:23 PM

4. 
   AH89 liked post by ElDax On thread : Hunting rifle

   I think a Tikka is the right choice here, seriously hard to beat with the level of aftermarket support options available as from the sounds of things you will want to upgrade it. I grew up shooting a...

   Liked On: 05-08-2023, 04:43 PM

5. 
   AH89 liked post by mudgripz On thread : Hunting rifle

   Hmmmmm... Josh - a thought or two from a veteran. :) 60+ years since I shot my first animal. No idea how many taken since then, plus years of competitive shooting. Am quite often helping new...

   Liked On: 05-08-2023, 04:42 PM

6. 
   AH89 liked post by gimp On thread : Buy/sell section

   .

   Liked On: 05-08-2023, 12:04 AM

7. 
   AH89 liked post by dannyb On thread : Buy/sell section

   patience...sorry for any inconvenience, but I'm sure you understand the inconvenience of members being scammed is a far greater priority.

   Liked On: 05-08-2023, 12:02 AM

8. 
   AH89 liked post by veitnamcam On thread : 7PRCW or 7/6.5PRC

   That is bloody anemic! Is that with factory ammo or a handload? Mine chucks 153gr at 2950 from 22"....have had 3k but brass life wasn't good.

   Liked On: 04-08-2023, 09:45 PM

9. 
   AH89 liked post by matto1234 On thread : Some thoughts on 6.5 PRC

   Im getting 2980 with a 156 out of a 24inch tube and 2850 from a 20inch tube. Id imagine id get close to 3100 with the 143s

   Liked On: 03-08-2023, 05:57 PM

10. 
    AH89 liked post by muzr257 On thread : Curtis Custom 6.5 Creedmoor

    snap! But mines in 25 Creedmoor.124788

    Liked On: 03-08-2023, 05:37 PM

11. 
    AH89 liked post by camo wsm On thread : Curtis Custom 6.5 Creedmoor

    Curtis Custom 6.5 Creedmoor Built by Dean Maisey and just finished up over the weekend, this build is for a client for field/PRS style shooting Specs of the build are: Curtis Custom Vector...

    Liked On: 03-08-2023, 05:36 PM

12. 
    AH89 liked post by Tahr On thread : 6.5 prc loads

    outdoorlad 270 wsm, 117 grns, 3450 fps. They are devastating on deer. And accurate. I use R26, and I expect that this performance would be within a hairs breadth of the 6.5PRC. In hole (the...

    Liked On: 03-08-2023, 05:27 PM

13. 
    AH89 liked post by 300wsm for life On thread : 73gr ELDM in 17.5" 1-9 twist?

    I use these in my 18in tikka. No issues. Target at 100mtrs with the 73g ELD m. Shot off to the right is a different weight bullet. 230318

    Liked On: 03-08-2023, 05:24 PM

14. 
    AH89 liked post by Gkp On thread : 7mm PRC

    Pretty much a 7BM but with super accurate ammo off the shelf! As much as I dislike having to reload I think the good old 7saum will stay my go to. Drops big reds at 600 to 700 yards with ease. What...

    Liked On: 03-08-2023, 03:19 PM

15. 
    AH89 liked post by Kelton On thread : Gun Porn, show off your new toys

    Couple of terrible picture's taken in a dark room tricky to photograph in the dark with no bipod to support the rifle il be sure to get some more snaps when bipods sorted and its out their doing it

    Liked On: 03-08-2023, 03:00 PM

Page 1 of 2 12 Last

• Jump to page: