akaroa1
Member

6779 Likes

Page 173 of 452 First ... 73123159160161162163164165166167168169170171172173174175176177178179180181182183184185186187223273 ... Last

• Jump to page:

1. 
   shananah liked post by akaroa1 On thread : Home Brew Black Powder........Craft Powder?

   I must confess that my main interest in home made BP is being able to feed a cannon or mortar. I don't really use enough with my 6 muzzleloaders to warrant making my own. Cannons and mortars do...

   Liked On: 26-08-2023, 01:17 PM

2. 
   Joe_90 liked post by akaroa1 On thread : Reloading 7mm Rem mag

   This could be an image of absolutely any 7mm You've hidden the best bit of the case !

   Liked On: 23-08-2023, 09:00 PM

3. 
   10-Ring liked post by akaroa1 On thread : Release agent

   blip do yourself a huge favour and buy a small lot of this clear furniture polish / wax I is all you will ever need 231538 I'm a commercial joiner by trade and have epoxy glued and moulded...

   Liked On: 22-08-2023, 11:17 PM

4. 
   7mmsaum liked post by akaroa1 On thread : Reloading 7mm Rem mag

   This could be an image of absolutely any 7mm You've hidden the best bit of the case !

   Liked On: 22-08-2023, 08:49 PM

5. 
   Moa Hunter liked post by akaroa1 On thread : Classics corner and vintage rifle reviews

   I had a bit of down time in the workshop while I wait for my 222 Rimmed projects retaining compound to cure So I ripped into this Stevens 044 1/2 32 Long rimfire. Converted the breech block...

   Liked On: 22-08-2023, 09:43 AM

6. 
   Micky Duck liked post by akaroa1 On thread : Classics corner and vintage rifle reviews

   Micky Duck Yes it's an ideal walking vintage rifle for inside 50m Only problem is it doesn't have any sling mounts on it. Typical of a lot of USA vintage rifles. So I will need to make a no drill...

   Liked On: 21-08-2023, 10:06 PM

7. 
   rewa liked post by akaroa1 On thread : friends asking how much for load development

   That section applies to selling existing ammunition Doing load development you will be providing a service and you will need a dealers license Sorry just my take on providing a product or...

   Liked On: 21-08-2023, 09:13 PM

8. 
   -BW- liked post by akaroa1 On thread : Turning a chamber reamer into a live pilot

   I just thought this might be a project that might help someone else out. I re barreled one of my vintage rifles recently. Had it dialed up in the lathe to cut the chamber and realised it's bore...

   Liked On: 21-08-2023, 08:32 PM

9. 
   Micky Duck liked post by akaroa1 On thread : Classics corner and vintage rifle reviews

   I had a bit of down time in the workshop while I wait for my 222 Rimmed projects retaining compound to cure So I ripped into this Stevens 044 1/2 32 Long rimfire. Converted the breech block...

   Liked On: 21-08-2023, 05:27 PM

10. 
    blip liked post by akaroa1 On thread : Release agent

    Yes release agent the plastacine. And release where the plastacine is going into because its sticks pretty well and can be hard to clean off At the Warehouse in the craft dept. Ask a shop...

    Liked On: 20-08-2023, 07:54 PM

11. 
    Micky Duck liked post by akaroa1 On thread : Release agent

    I have also used blu tack, but its harder to shape and model compared to plastacene. Craft stores do have proper plastacene it just might be called modelers clay or something different Don't...

    Liked On: 20-08-2023, 03:44 PM

12. 
    Micky Duck liked post by akaroa1 On thread : Release agent

    Yes release agent the plastacine. And release where the plastacine is going into because its sticks pretty well and can be hard to clean off At the Warehouse in the craft dept. Ask a shop...

    Liked On: 20-08-2023, 03:43 PM

13. 
    blip liked post by akaroa1 On thread : Release agent

    I have also used blu tack, but its harder to shape and model compared to plastacene. Craft stores do have proper plastacene it just might be called modelers clay or something different Don't...

    Liked On: 20-08-2023, 02:39 PM

14. 
    nevereadyfreddy liked post by akaroa1 On thread : Release agent

    I have also used blu tack, but its harder to shape and model compared to plastacene. Craft stores do have proper plastacene it just might be called modelers clay or something different Don't...

    Liked On: 20-08-2023, 01:43 PM

15. 
    Husky1600#2 liked post by akaroa1 On thread : Release agent

    blip do yourself a huge favour and buy a small lot of this clear furniture polish / wax I is all you will ever need 231538 I'm a commercial joiner by trade and have epoxy glued and moulded...

    Liked On: 20-08-2023, 12:47 PM

Page 173 of 452 First ... 73123159160161162163164165166167168169170171172173174175176177178179180181182183184185186187223273 ... Last

• Jump to page: