akaroa1
Member

6791 Likes

Page 198 of 453 First ... 98148184185186187188189190191192193194195196197198199200201202203204205206207208209210211212248298 ... Last

• Jump to page:

1. 
   Micky Duck liked post by akaroa1 On thread : Wildcat appreciation thread

   I'm also chasing buying a 303-22 complete rifle that comes with brass, dies and the chamber reamer that it was cut with That's an interesting wildcat I also have 303-25 dies and could make a...

   Liked On: 16-06-2023, 08:25 PM

2. 
   Micky Duck liked post by akaroa1 On thread : DIY bullet tips for flat nosed cast bullets

   Oh dear someone has gone down a deep dark hole

   Liked On: 16-06-2023, 06:00 PM

3. 
   nevereadyfreddy liked post by akaroa1 On thread : Wildcat appreciation thread

   My wildcat leaning is towards a 375 because of reasonable bullet options But it needs to be rimmed So I was thinking a 9.3x74R case necked up to 375 A nice sized good quality case but not as...

   Liked On: 16-06-2023, 03:09 PM

4. 
   makka liked post by akaroa1 On thread : Wildcat appreciation thread

   My wildcat leaning is towards a 375 because of reasonable bullet options But it needs to be rimmed So I was thinking a 9.3x74R case necked up to 375 A nice sized good quality case but not as...

   Liked On: 16-06-2023, 02:42 PM

5. 
   -BW- liked post by akaroa1 On thread : Wildcat appreciation thread

   My wildcat leaning is towards a 375 because of reasonable bullet options But it needs to be rimmed So I was thinking a 9.3x74R case necked up to 375 A nice sized good quality case but not as...

   Liked On: 16-06-2023, 01:29 PM

6. 
   Makros liked post by akaroa1 On thread : Wildcat appreciation thread

   My wildcat leaning is towards a 375 because of reasonable bullet options But it needs to be rimmed So I was thinking a 9.3x74R case necked up to 375 A nice sized good quality case but not as...

   Liked On: 16-06-2023, 01:03 PM

7. 
   chainsaw liked post by akaroa1 On thread : Lapua 6.5 PRC Brass - Split Necks

   That is an unusual split, not going through to the case mouth. Because you are so through with the brass prep and the Lapua brass should be just fine. I think there is something wrong between the...

   Liked On: 15-06-2023, 07:30 PM

8. 
   Moa Hunter liked post by akaroa1 On thread : Lapua 6.5 PRC Brass - Split Necks

   That is an unusual split, not going through to the case mouth. Because you are so through with the brass prep and the Lapua brass should be just fine. I think there is something wrong between the...

   Liked On: 14-06-2023, 10:48 PM

9. 
   Micky Duck liked post by akaroa1 On thread : Which tops rifle

   Keep your options open on caliber and rifle brand and buy a good second hand rifle. Put the savings into better glass or buy yourself some reloading gear. Plenty of guys bore quickly and sell...

   Liked On: 14-06-2023, 10:04 PM

10. 
    Micky Duck liked post by akaroa1 On thread : Rust Bluing Solution

    226613

    Liked On: 14-06-2023, 09:42 PM

11. 
    6.5 CRD liked post by akaroa1 On thread : Lapua 6.5 PRC Brass - Split Necks

    That is an unusual split, not going through to the case mouth. Because you are so through with the brass prep and the Lapua brass should be just fine. I think there is something wrong between the...

    Liked On: 14-06-2023, 09:05 AM

12. 
    dannyb liked post by akaroa1 On thread : Lapua 6.5 PRC Brass - Split Necks

    I think bad lot of brass from Lapua least likely cause Look at the numbers carefully for the things you have and can create hard data from. Rifle, sized brass and fired brass

    Liked On: 14-06-2023, 08:30 AM

13. 
    Micky Duck liked post by akaroa1 On thread : so who has shot a deer with a .308

    @ Micky Duck here is a cautionary and timely tale about the 308 When we moved to level 3 and after a long period not hunting due to illness I took off for a day hunt on private land as L3 allows...

    Liked On: 13-06-2023, 07:58 PM

14. 
    grandpamac liked post by akaroa1 On thread : Brand new 2 bore rifle

    Yeh I stayed away from this post until grandpamac name checked me into it And I still haven't looked at the link Having dislocated both of my shoulders in a fall I will class myself as not...

    Liked On: 13-06-2023, 04:43 PM

15. 
    Micky Duck liked post by akaroa1 On thread : 303-25 reloading

    Yeetziy I have all the gear to do this Anneal 303 brass Form in 303-25 dies Trim to length Re anneal It's pretty easy Best done with good quality new brass Or with fired modern low round...

    Liked On: 12-06-2023, 05:43 PM

Page 198 of 453 First ... 98148184185186187188189190191192193194195196197198199200201202203204205206207208209210211212248298 ... Last

• Jump to page: