akaroa1
Member

5720 Likes

Page 214 of 382 First ... 114164200201202203204205206207208209210211212213214215216217218219220221222223224225226227228264314 ... Last

• Jump to page:

1. 
   Finnwolf liked post by akaroa1 On thread : 1885 rustoration

   I got this very rough Winchester 1885 high wall action sent to me a few months ago. Someone had taken to it with a gas torch and vice grips while holding it in an engineers vice without jaw...

   Liked On: 08-05-2022, 05:58 PM

2. 
   Shamus_ liked post by akaroa1 On thread : 1885 rustoration

   Then the real work began I made a bore guided drill on the Elliot tool and cutter grinder And drilled out the entire barrel to 16mm 196449 While it was in the lathe I took 3mm off the barrel...

   Liked On: 08-05-2022, 05:48 PM

3. 
   Makros liked post by akaroa1 On thread : 1885 rustoration

   I got this very rough Winchester 1885 high wall action sent to me a few months ago. Someone had taken to it with a gas torch and vice grips while holding it in an engineers vice without jaw...

   Liked On: 08-05-2022, 05:48 PM

4. 
   40mm liked post by akaroa1 On thread : Texas based forum members ?

   Easier to spell !

   Liked On: 05-05-2022, 08:37 PM

5. 
   RV1 liked post by akaroa1 On thread : Bino harness suggestions

   195959

   Liked On: 04-05-2022, 02:58 PM

6. 
   Steelisreal liked post by akaroa1 On thread : Bino harness suggestions

   195959

   Liked On: 04-05-2022, 02:35 PM

7. 
   Steelisreal liked post by akaroa1 On thread : Bino harness suggestions

   Twinn Needle Made in CHCH Buy NZ made Lots of colour options Can add more parts either side for thermal or radio Zips and magnet catch

   Liked On: 04-05-2022, 02:34 PM

8. 
   thejamesjames liked post by akaroa1 On thread : Bino harness suggestions

   Twinn Needle Made in CHCH Buy NZ made Lots of colour options Can add more parts either side for thermal or radio Zips and magnet catch

   Liked On: 04-05-2022, 08:01 AM

9. 
   Moa Hunter liked post by akaroa1 On thread : What tents is everyone using

   Kuiu Mountain Star for me also Easy pitch Slightly adjustable ventilation No flapping Good vestibles Well made I went lighter but it also meant smaller and the materials just aren't up to...

   Liked On: 02-05-2022, 11:30 PM

10. 
    Pixie Z liked post by akaroa1 On thread : Bino harness suggestions

    Twinn Needle Made in CHCH Buy NZ made Lots of colour options Can add more parts either side for thermal or radio Zips and magnet catch

    Liked On: 02-05-2022, 10:33 PM

11. 
    Shamus_ liked post by akaroa1 On thread : Bino harness suggestions

    195959

    Liked On: 01-05-2022, 01:51 PM

12. 
    Micky Duck liked post by akaroa1 On thread : Possum Trapping

    BeeMan I'm on Banks Peninsula and the conditions are always pretty mild here. This line is at around 100m ASL and within 1km of the harbor. So practically winter less. Haven't had a frost yet this...

    Liked On: 16-04-2022, 08:13 PM

13. 
    Micky Duck liked post by akaroa1 On thread : Possum Trapping

    Ran my first trap line of the season last night. 30 traps 14 caught 4 more sprung 950 grams of fur from the 14 Possums were in very good condition after a very good summer in Canterbury....

    Liked On: 16-04-2022, 08:12 PM

14. 
    Fssprecision liked post by akaroa1 On thread : Suppressed 9mm

    A 9mm bolt gun might be a cool rifle But there is simply no comparison between the 9mm and 45 ACP I have done 12 gauge chamber converters for both 9mm is a sweet little round but from my...

    Liked On: 15-04-2022, 08:17 PM

15. 
    Micky Duck liked post by akaroa1 On thread : Suppressed 9mm

    A 9mm bolt gun might be a cool rifle But there is simply no comparison between the 9mm and 45 ACP I have done 12 gauge chamber converters for both 9mm is a sweet little round but from my...

    Liked On: 15-04-2022, 10:10 AM

Page 214 of 382 First ... 114164200201202203204205206207208209210211212213214215216217218219220221222223224225226227228264314 ... Last

• Jump to page: