akaroa1
Member

6915 Likes

Page 257 of 461 First ... 157207243244245246247248249250251252253254255256257258259260261262263264265266267268269270271307357 ... Last

• Jump to page:

1. 
   Moa Hunter liked post by akaroa1 On thread : Marlin Ballard restoration

   There's a small island of very nice checkering on the hammer cocking piece It would be a crime to fit a repop without the patina and these details So slow and steady and use as much of the...

   Liked On: 16-10-2022, 10:41 PM

2. 
   Joe_90 liked post by akaroa1 On thread : Marlin Ballard restoration

   There's a small island of very nice checkering on the hammer cocking piece It would be a crime to fit a repop without the patina and these details So slow and steady and use as much of the...

   Liked On: 16-10-2022, 09:39 PM

3. 
   Mathias liked post by akaroa1 On thread : Marlin Ballard restoration

   There's a small island of very nice checkering on the hammer cocking piece It would be a crime to fit a repop without the patina and these details So slow and steady and use as much of the...

   Liked On: 16-10-2022, 06:38 PM

4. 
   Kiwi.bloke liked post by akaroa1 On thread : Marlin Ballard restoration

   There's a small island of very nice checkering on the hammer cocking piece It would be a crime to fit a repop without the patina and these details So slow and steady and use as much of the...

   Liked On: 16-10-2022, 06:20 PM

5. 
   Shamus_ liked post by akaroa1 On thread : Marlin Ballard restoration

   I have made one main lever screw blank from 4340 and scratch cut a 7/32-40 thread so the button die goes on straight I will make 2 or 3 of these so I can choose the best one when they are hardened...

   Liked On: 16-10-2022, 06:00 PM

6. 
   grandpamac liked post by akaroa1 On thread : Marlin Ballard restoration

   There's a small island of very nice checkering on the hammer cocking piece It would be a crime to fit a repop without the patina and these details So slow and steady and use as much of the...

   Liked On: 16-10-2022, 05:47 PM

7. 
   Kiwi.bloke liked post by akaroa1 On thread : Marlin Ballard restoration

   No I want to keep it as original as possible I've fixed worse it just takes time and care and a bit of brain storming

   Liked On: 16-10-2022, 02:59 PM

8. 
   Moa Hunter liked post by akaroa1 On thread : Cast Lead Thread ?

   No speed limit on powder coated gas checked bullets other than running out of case capacity

   Liked On: 16-10-2022, 02:21 PM

9. 
   Steelisreal liked post by akaroa1 On thread : Marlin Ballard restoration

   I have made one main lever screw blank from 4340 and scratch cut a 7/32-40 thread so the button die goes on straight I will make 2 or 3 of these so I can choose the best one when they are hardened...

   Liked On: 16-10-2022, 02:21 PM

10. 
    Moa Hunter liked post by akaroa1 On thread : Marlin Ballard restoration

    I have made one main lever screw blank from 4340 and scratch cut a 7/32-40 thread so the button die goes on straight I will make 2 or 3 of these so I can choose the best one when they are hardened...

    Liked On: 16-10-2022, 02:19 PM

11. 
    Micky Duck liked post by akaroa1 On thread : Marlin Ballard restoration

    I want to make a proper fix and be able to shoot this occasionally as a party piece It's been in collections a long time and I'm the first owner who has plans to shoot it So no surprises with...

    Liked On: 16-10-2022, 01:56 PM

12. 
    Micky Duck liked post by akaroa1 On thread : Marlin Ballard restoration

    And a worn and bent main under lever pivot screw Will make a new one to the slightly worn frame, lever and extractor sizes out of 4340 high carbon steel and harden and temper it Should last...

    Liked On: 16-10-2022, 01:56 PM

13. 
    Micky Duck liked post by akaroa1 On thread : Marlin Ballard restoration

    I will be sure to get in touch with you if I blow up the rifle and the stock is available That's if I'm still alive

    Liked On: 16-10-2022, 01:55 PM

14. 
    Micky Duck liked post by akaroa1 On thread : Marlin Ballard restoration

    Then after finishing the woodwork deep clean and stock oil Re assembled it all Magnificent does not describe the butt stock walnut And my phone camera doesn't do it full justice It's such a dark...

    Liked On: 16-10-2022, 01:55 PM

15. 
    Micky Duck liked post by akaroa1 On thread : Marlin Ballard restoration

    I tidied up a screw set for the original and remarkably good condition monogrammed Marlin F A C hard rubber shotgun butt plate 207993

    Liked On: 16-10-2022, 01:54 PM

Page 257 of 461 First ... 157207243244245246247248249250251252253254255256257258259260261262263264265266267268269270271307357 ... Last

• Jump to page: