First range session was a total success 5 rounds at 50 yards from a standing rest Worse than useless buck horn sights 202227 202228 The tang is tapped for a Lyman or similar staff tang...
Liked On: 25-07-2022, 12:08 PM
While I had the scales in the workshop I put it on and it's exactly 7 pounds even So a bit on the light side for a 303 but handy in a sporting rifle that won't be shot often
Liked On: 24-07-2022, 08:18 PM
Another wet day so it's finished Put 5 heavy proof loads through it using one case to see how it went for sizing and primer pocket All good So I fitted the mount and milled a little relief for...
Liked On: 22-07-2022, 09:58 PM
It's got the lever but the spring that holds it is very lazy I think it's broken but the pin is pretty reluctant to come out ! I will punch it out with the hydraulic press tomorrow
Liked On: 22-07-2022, 08:24 PM
Another wet day so it's finished Put 5 heavy proof loads through it using one case to see how it went for sizing and primer pocket All good So I fitted the mount and milled a little relief for...
Liked On: 22-07-2022, 07:43 PM
Barrel is fully assembled and curing by the fire Mount is profiled to the larger diameter reciever 201846 Rings and scope fitted to base and checked eye relief on another of my Baikal project...
Liked On: 22-07-2022, 07:43 PM
Another wet day so it's finished Put 5 heavy proof loads through it using one case to see how it went for sizing and primer pocket All good So I fitted the mount and milled a little relief for...
Liked On: 22-07-2022, 07:37 PM
Good idea The contender super 14" barrel data should work then in the 16" barrels I'm doing Re the 30-223 Vulcan barrels have a 30 cal 1:7" 5 groove button on the way from USA especially for...
Liked On: 22-07-2022, 06:07 PM
Barrel is fully assembled and curing by the fire Mount is profiled to the larger diameter reciever 201846 Rings and scope fitted to base and checked eye relief on another of my Baikal project...
Liked On: 21-07-2022, 07:44 PM
Barrel is fully assembled and curing by the fire Mount is profiled to the larger diameter reciever 201846 Rings and scope fitted to base and checked eye relief on another of my Baikal project...
Liked On: 21-07-2022, 05:38 PM
Barrel is fully assembled and curing by the fire Mount is profiled to the larger diameter reciever 201846 Rings and scope fitted to base and checked eye relief on another of my Baikal project...
Liked On: 21-07-2022, 05:12 PM
Barrel is fully assembled and curing by the fire Mount is profiled to the larger diameter reciever 201846 Rings and scope fitted to base and checked eye relief on another of my Baikal project...
Liked On: 21-07-2022, 02:20 PM
Barrel is fully assembled and curing by the fire Mount is profiled to the larger diameter reciever 201846 Rings and scope fitted to base and checked eye relief on another of my Baikal project...
Liked On: 21-07-2022, 01:36 PM
Barrel is fully assembled and curing by the fire Mount is profiled to the larger diameter reciever 201846 Rings and scope fitted to base and checked eye relief on another of my Baikal project...
Liked On: 21-07-2022, 01:17 PM
I have a factory 375 Win contender barrel And that brass is very much appreciated It's my favorite contender barrel But the 30-30 will be fun
Liked On: 21-07-2022, 12:17 AM