akaroa1
Member

6806 Likes

Page 285 of 454 First ... 185235271272273274275276277278279280281282283284285286287288289290291292293294295296297298299335385 ... Last

• Jump to page:

1. 
   SixtyTen liked post by akaroa1 On thread : 1885 rustoration

   Set up barrel again in the lathe Machine barrel shank and timing the octagonal flats and head space Then team chamber 45-70 196451 Turn it around and tidy up and lapp the muzzle 196452

   Liked On: 09-05-2022, 07:37 PM

2. 
   Mathias liked post by akaroa1 On thread : 1885 rustoration

   Set up barrel again in the lathe Machine barrel shank and timing the octagonal flats and head space Then team chamber 45-70 196451 Turn it around and tidy up and lapp the muzzle 196452

   Liked On: 09-05-2022, 04:18 PM

3. 
   Mathias liked post by akaroa1 On thread : 1885 rustoration

   Then the real work began I made a bore guided drill on the Elliot tool and cutter grinder And drilled out the entire barrel to 16mm 196449 While it was in the lathe I took 3mm off the barrel...

   Liked On: 09-05-2022, 04:16 PM

4. 
   Mathias liked post by akaroa1 On thread : 1885 rustoration

   196448

   Liked On: 09-05-2022, 04:15 PM

5. 
   rugerman liked post by akaroa1 On thread : 1885 rustoration

   Set up barrel again in the lathe Machine barrel shank and timing the octagonal flats and head space Then team chamber 45-70 196451 Turn it around and tidy up and lapp the muzzle 196452

   Liked On: 09-05-2022, 12:49 PM

6. 
   wsm junkie liked post by akaroa1 On thread : 1885 rustoration

   Set up barrel again in the lathe Machine barrel shank and timing the octagonal flats and head space Then team chamber 45-70 196451 Turn it around and tidy up and lapp the muzzle 196452

   Liked On: 09-05-2022, 09:10 AM

7. 
   viper liked post by akaroa1 On thread : 1885 rustoration

   Set up barrel again in the lathe Machine barrel shank and timing the octagonal flats and head space Then team chamber 45-70 196451 Turn it around and tidy up and lapp the muzzle 196452

   Liked On: 09-05-2022, 07:51 AM

8. 
   viper liked post by akaroa1 On thread : 1885 rustoration

   I received a few more key parts in the post from a forum member yesterday Sear and seat spring Link and 1 link pin Screwed my old #3 barrel on properly Pulled the main spring from my...

   Liked On: 09-05-2022, 07:48 AM

9. 
   Steelisreal liked post by akaroa1 On thread : 1885 rustoration

   Then the real work began I made a bore guided drill on the Elliot tool and cutter grinder And drilled out the entire barrel to 16mm 196449 While it was in the lathe I took 3mm off the barrel...

   Liked On: 09-05-2022, 12:35 AM

10. 
    Steelisreal liked post by akaroa1 On thread : 1885 rustoration

    Set up barrel again in the lathe Machine barrel shank and timing the octagonal flats and head space Then team chamber 45-70 196451 Turn it around and tidy up and lapp the muzzle 196452

    Liked On: 09-05-2022, 12:35 AM

11. 
    csmiffy liked post by akaroa1 On thread : 1885 rustoration

    Set up barrel again in the lathe Machine barrel shank and timing the octagonal flats and head space Then team chamber 45-70 196451 Turn it around and tidy up and lapp the muzzle 196452

    Liked On: 08-05-2022, 11:18 PM

12. 
    Moa Hunter liked post by akaroa1 On thread : 1885 rustoration

    Set up barrel again in the lathe Machine barrel shank and timing the octagonal flats and head space Then team chamber 45-70 196451 Turn it around and tidy up and lapp the muzzle 196452

    Liked On: 08-05-2022, 10:48 PM

13. 
    Moa Hunter liked post by akaroa1 On thread : 1885 rustoration

    Then the real work began I made a bore guided drill on the Elliot tool and cutter grinder And drilled out the entire barrel to 16mm 196449 While it was in the lathe I took 3mm off the barrel...

    Liked On: 08-05-2022, 10:47 PM

14. 
    Moa Hunter liked post by akaroa1 On thread : 1885 rustoration

    196448

    Liked On: 08-05-2022, 10:45 PM

15. 
    Micky Duck liked post by akaroa1 On thread : 1885 rustoration

    Set up barrel again in the lathe Machine barrel shank and timing the octagonal flats and head space Then team chamber 45-70 196451 Turn it around and tidy up and lapp the muzzle 196452

    Liked On: 08-05-2022, 09:11 PM

Page 285 of 454 First ... 185235271272273274275276277278279280281282283284285286287288289290291292293294295296297298299335385 ... Last

• Jump to page: