akaroa1
Member

6817 Likes

Page 378 of 455 First ... 278328364365366367368369370371372373374375376377378379380381382383384385386387388389390391392428 ... Last

• Jump to page:

1. 
   Tommy liked post by akaroa1 On thread : Classy lightweight takedown

   Wet day so finished the take down thumb screw. Knurled the end and tapped in the m3 cap screw that makes it captive under the grip cap. Fitted a hanger bar also and will start on a splinter fore...

   Liked On: 02-01-2020, 10:03 PM

2. 
   Tommy liked post by akaroa1 On thread : Classy lightweight takedown

   I just popped the T.C. emblem off the pistol grip cap and bored it out 18mm for the 16mm take down screw diameter which comes through in a slight angle and it comes out through the center of where...

   Liked On: 02-01-2020, 10:01 PM

3. 
   Tommy liked post by akaroa1 On thread : Classy lightweight takedown

   joelhenton I solved the tool less take down problem. Don't take down at the hinge pin Take down at the butt stock bolt. Barrel plus action stay together and are only 40mm longer than barrel...

   Liked On: 02-01-2020, 10:01 PM

4. 
   Joe_90 liked post by akaroa1 On thread : Classy lightweight takedown

   Splinter fore end done. Fitted around the hanger bar and the action folds inside the end of it when it hinges. It's perfect when carrying one handed because the ballence point is just in front or...

   Liked On: 02-01-2020, 09:33 PM

5. 
   dannyb liked post by akaroa1 On thread : Classy lightweight takedown

   Splinter fore end done. Fitted around the hanger bar and the action folds inside the end of it when it hinges. It's perfect when carrying one handed because the ballence point is just in front or...

   Liked On: 02-01-2020, 09:19 PM

6. 
   Tikka7mm08 liked post by akaroa1 On thread : Classy lightweight takedown

   Splinter fore end done. Fitted around the hanger bar and the action folds inside the end of it when it hinges. It's perfect when carrying one handed because the ballence point is just in front or...

   Liked On: 02-01-2020, 08:32 PM

7. 
   canross liked post by akaroa1 On thread : Classy lightweight takedown

   Splinter fore end done. Fitted around the hanger bar and the action folds inside the end of it when it hinges. It's perfect when carrying one handed because the ballence point is just in front or...

   Liked On: 02-01-2020, 08:19 PM

8. 
   canross liked post by akaroa1 On thread : Classy lightweight takedown

   Wet day so finished the take down thumb screw. Knurled the end and tapped in the m3 cap screw that makes it captive under the grip cap. Fitted a hanger bar also and will start on a splinter fore...

   Liked On: 02-01-2020, 08:18 PM

9. 
   Matt2308 liked post by akaroa1 On thread : Classy lightweight takedown

   Splinter fore end done. Fitted around the hanger bar and the action folds inside the end of it when it hinges. It's perfect when carrying one handed because the ballence point is just in front or...

   Liked On: 02-01-2020, 08:17 PM

10. 
    Cordite liked post by akaroa1 On thread : Help identify a firearm?

    It's cheaper because its short Cost by the cm

    Liked On: 01-01-2020, 11:04 PM

11. 
    gadgetman liked post by akaroa1 On thread : Help identify a firearm?

    Rimmed case with plenty of body taper and they just slide out. Last deer for 2019 with K95 127215

    Liked On: 01-01-2020, 03:03 PM

12. 
    Matt2308 liked post by akaroa1 On thread : Help identify a firearm?

    Rimmed case with plenty of body taper and they just slide out. Last deer for 2019 with K95 127215

    Liked On: 01-01-2020, 12:45 PM

13. 
    MB liked post by akaroa1 On thread : Catch Any Trout Today?

    First double figure trout for the season Upper Grey river 650mm long 90mm wise Awesome thick fish 125921 125922

    Liked On: 30-12-2019, 09:23 AM

14. 
    Micky Duck liked post by akaroa1 On thread : Lets See The Transport havn a Oops moment

    Not entirely a oops moment But this visitor should have mentioned he was coming in a new Aston Martin and all the sills were carbon fiber Some of you guys know what my driveway is luke. Nice...

    Liked On: 23-12-2019, 07:23 PM

15. 
    dannyb liked post by akaroa1 On thread : Any CAD experts on here

    Thanks to all those that responded. Great bunch of guys in here Cheers

    Liked On: 23-12-2019, 08:38 AM

Page 378 of 455 First ... 278328364365366367368369370371372373374375376377378379380381382383384385386387388389390391392428 ... Last

• Jump to page: