apkiwi
Member

27 Likes

Page 1 of 2 12 Last

• Jump to page:

1. 
   Scouterkotare liked post by apkiwi On thread : CZ SP-01 Shadow Breech Face dent

   Thanks gundoc appreciate the check! I’m looking forward to taking this out on Sunday and seeing how it goes. As long as it’s reliable I’ll be happy, parts seem to be easy enough to come by.

   Liked On: 12-12-2024, 08:52 PM

2. 
   Philipo liked post by apkiwi On thread : Gun city opening in Palmerston North

   Try the side street where KFC is…the old Kitchen Things. Freshly painted a certain shade of blue, a bunch of new bollards around the outside, roller door over the normal entrance too

   Liked On: 14-10-2024, 02:11 PM

3. 
   jusepy81 liked post by apkiwi On thread : Gun city opening in Palmerston North

   Try the side street where KFC is…the old Kitchen Things. Freshly painted a certain shade of blue, a bunch of new bollards around the outside, roller door over the normal entrance too

   Liked On: 11-10-2024, 02:11 PM

4. 
   Shinobiisixthree liked post by apkiwi On thread : Gun city opening in Palmerston North

   Try the side street where KFC is…the old Kitchen Things. Freshly painted a certain shade of blue, a bunch of new bollards around the outside, roller door over the normal entrance too

   Liked On: 09-10-2024, 09:54 PM

5. 
   sharps no 1 liked post by apkiwi On thread : Gun city opening in Palmerston North

   Try the side street where KFC is…the old Kitchen Things. Freshly painted a certain shade of blue, a bunch of new bollards around the outside, roller door over the normal entrance too

   Liked On: 09-10-2024, 08:02 AM

6. 
   PeteD liked post by apkiwi On thread : Gun city opening in Palmerston North

   Try the side street where KFC is…the old Kitchen Things. Freshly painted a certain shade of blue, a bunch of new bollards around the outside, roller door over the normal entrance too

   Liked On: 09-10-2024, 07:16 AM

7. 
   Fssprecision liked post by apkiwi On thread : Longbranch No4 mag problem

   Does move freely and no binding to date

   Liked On: 02-05-2024, 07:10 PM

8. 
   -BW- liked post by apkiwi On thread : Greek 303 pulled projectiles

   Oh and I cleaned them up with Autosol which worked really well, a little time consuming though. And weigh them too, two of the 100 I purchased were 150gr

   Liked On: 18-04-2024, 07:42 PM

9. 
   Micky Duck liked post by apkiwi On thread : Greek 303 pulled projectiles

   Oh and I cleaned them up with Autosol which worked really well, a little time consuming though. And weigh them too, two of the 100 I purchased were 150gr

   Liked On: 15-04-2024, 07:30 PM

10. 
    pennyless liked post by apkiwi On thread : Colfo press release

    Sadly, over time I've come to realise that regardless of the rights and wrongs of an issue, money talks. The fastest way to get a crap process dumped is to point out how much it costs and where it...

    Liked On: 04-03-2024, 09:09 PM

11. 
    Steve123 liked post by apkiwi On thread : Colfo press release

    Sadly, over time I've come to realise that regardless of the rights and wrongs of an issue, money talks. The fastest way to get a crap process dumped is to point out how much it costs and where it...

    Liked On: 03-02-2024, 08:24 PM

12. 
    Micky Duck liked post by apkiwi On thread : Ridge in once fired .303 brass

    Na definitely not, was hard to capture the ridges without the light making it look like there were all kinds of lines running up the body, no lines on the bodies

    Liked On: 03-02-2024, 03:40 PM

13. 
    Micky Duck liked post by apkiwi On thread : Ridge in once fired .303 brass

    Trick of the light, only on the neck, almost wondering if it’s from the rifling…

    Liked On: 02-02-2024, 07:42 PM

14. 
    veitnamcam liked post by apkiwi On thread : Ridge in once fired .303 brass

    Ok soooo I just put one of the non-ridged S&B cases through the collet die on a hunch…. First time with no pressure, second time with the pressure I have applied to the neck size cases. The second...

    Liked On: 02-02-2024, 04:38 PM

15. 
    Got-ya liked post by apkiwi On thread : Colfo press release

    Sadly, over time I've come to realise that regardless of the rights and wrongs of an issue, money talks. The fastest way to get a crap process dumped is to point out how much it costs and where it...

    Liked On: 02-02-2024, 01:03 PM

Page 1 of 2 12 Last

• Jump to page: