Bagheera
Member

1143 Likes

Page 3 of 77 First 123456789101112131415161753 ... Last

• Jump to page:

1. 
   Bagheera liked post by Marty Henry On thread : Now wheres that last round i had ?

   You don't do it now because you did it back then, but if you haden't done it back then are you so sure you wouldn't do it now?

   Liked On: 06-01-2025, 12:51 PM

2. 
   Bagheera liked post by Happy Jack On thread : Now wheres that last round i had ?

   Went to use my unbranded jetboil not realisising that a Bic lighter was jammed in the bottom before fitting to the gas. Flames everywhere burnt all the cover off the pot and stunk the hut out.

   Liked On: 06-01-2025, 12:46 PM

3. 
   Bagheera liked post by F Majeur On thread : CDS/Chrono Question

   Thanks All, really helpful and I will take it all into consideration. I’m definitely going to try and get to a long distance range, it just makes sense that if the 400m bullet drop matches the...

   Liked On: 23-12-2024, 09:24 PM

4. 
   Bagheera liked post by John Duxbury On thread : Tikka T3x Lite in .30-06, questions about barrel length

   I have a .308 that shoots 150g at 2810 fps and a .30/06 that shoots the same bullet at 3009 fps. 180 bullets in the same rifles go 2612fps and 2820 fps Standard book max loads. Both have 22...

   Liked On: 23-12-2024, 09:21 PM

5. 
   Bagheera liked post by Friwi On thread : Tikka T3x Lite in .30-06, questions about barrel length

   Well I would say, start by killing gongs at 600 on the first shot. That would be good exercise.

   Liked On: 23-12-2024, 09:20 PM

6. 
   Bagheera liked post by Yesmate On thread : Tikka T3x Lite in .30-06, questions about barrel length

   the ability to hit and kill at 600m is gonna be on you mate, not the rifle.what the longest kill shot you have made to date?

   Liked On: 23-12-2024, 09:20 PM

7. 
   Bagheera liked post by Mooseman On thread : Tikka T3x Lite in .30-06, questions about barrel length

   I have both a 308 and 3006 with suppressed 20 inch barrels, the 308 pushes a 165 gr SST at 2730 fps, the 06 pushes the 178 gr ELDX at 2700 fps. With dial scopes both are capable and have sufficient...

   Liked On: 23-12-2024, 09:20 PM

8. 
   Bagheera liked post by Micky Duck On thread : Tikka T3x Lite in .30-06, questions about barrel length

   Leave it as long as you can. If you find your doing lots of tight bush hunting,buy a .308 or 7.62x39mm and cut THAT rifle down short.best of both worlds then.

   Liked On: 23-12-2024, 09:20 PM

9. 
   Bagheera liked post by gimp On thread : The dinner plate challenge

   100m standing offhand with the .223, ignore the .308 group. 265349

   Liked On: 21-12-2024, 01:07 PM

10. 
    Bagheera liked post by Husky1600#2 On thread : River bed shooting

    A few years ago I wanted to make sure I was doing things right for chasing the odd deer, a few rabbits, and geese in the Canterbury riverbeds. As well the occasional sighting in if needed. Tried Doc...

    Liked On: 18-12-2024, 12:20 PM

11. 
    Bagheera liked post by bumblefoot On thread : On the hunt for Parker hale rings...

    There is CZ set that fits the 19mm dovetail and depressions in the mount. I used them on the last 303 I bought. Can't remember the model but a Google will sort it for you. Cheers :)

    Liked On: 06-12-2024, 09:29 PM

12. 
    Bagheera liked post by gonetropo On thread : Electrical tape

    duct tape is like the force it has a light side and a dark side and holds the universe together

    Liked On: 06-12-2024, 02:38 PM

13. 
    Bagheera liked post by Snoppernator On thread : Electrical tape

    Duct Tape is the answer to all the world's problems.

    Liked On: 06-12-2024, 02:38 PM

14. 
    Bagheera liked post by TeRei On thread : Culling brass

    No 3 looks like its dead. Others look ok.

    Liked On: 06-12-2024, 12:48 PM

15. 
    Bagheera liked post by Micky Duck On thread : Culling brass

    2_3_4_5 all have light colour at web but yeah 3 is "interesting" can't see neck issues.

    Liked On: 06-12-2024, 12:46 PM

Page 3 of 77 First 123456789101112131415161753 ... Last

• Jump to page: