Bill999
Member

2149 Likes

Page 18 of 144 First ... 456789101112131415161718192021222324252627282930313268118 ... Last

• Jump to page:

1. 
   Bill999 liked post by Puffin On thread : Knife sharpeners you’d recommend

   Have a look at the pics here in this thread from 2020 for some of the different styles of sharpener. https://www.nzhuntingandshooting.co.nz/f22/identify-knife-sharpener-57848/

   Liked On: 21-08-2023, 02:33 PM

2. 
   Bill999 liked post by 7mmsaum On thread : Knife sharpeners you’d recommend

   I just run the Mercator down the Sako barrel a couple of times and carry on Easy :) 231506

   Liked On: 21-08-2023, 02:32 PM

3. 
   Bill999 liked post by andyanimal31 On thread : Knife sharpeners you’d recommend

   I have fucked around with a lot of systems and by far the best is the aussie invented and made easy-sharp. I got onto them when working in a muelsing gang for a couple of seasons in WA. The flip...

   Liked On: 21-08-2023, 02:31 PM

4. 
   Bill999 liked post by Moutere On thread : Knife sharpeners you’d recommend

   My experience with the following. Lansky is ok on smaller knives, not so good on larger knives Scary sharp is good on larger knives, straighter the better. Gets fiddly with smaller blades. Tormek...

   Liked On: 21-08-2023, 02:30 PM

5. 
   Bill999 liked post by Micky Duck On thread : Knife sharpeners you’d recommend

   depends if the old fella is any good with an oil stone or not.... one of the diamond/oval steels is a good idea,you can spend serious money on a scarey sharp of warthog system...or smaller amount on...

   Liked On: 21-08-2023, 02:27 PM

6. 
   Bill999 liked post by 7mmsaum On thread : Re tension a spring?

   Your over thinking the fuck out if it Measure the O/D with callipers Squash slightly until 2 mm smaller at the open end Refit and carry on hunting

   Liked On: 21-08-2023, 09:27 AM

7. 
   Bill999 liked post by dogmatix On thread : Help in Auckland required. Snapped scope ring bolt

   Well, at least it had the decency to snap with around 1mm to spare. :D Any loctite holding it in? You might be able to get away with cutting slot in the top with a dremel for a flat head screw...

   Liked On: 21-08-2023, 09:25 AM

8. 
   Bill999 liked post by Micky Duck On thread : Help in Auckland required. Snapped scope ring bolt

   sounds like good EXCUSE to go and visit Amanda to me....

   Liked On: 21-08-2023, 09:24 AM

9. 
   Bill999 liked post by 6x47 On thread : Bipod heights

   Mine are Harris. My 6-9 is for either BR or varmint use. The 9-13s get to see action on the deer rifles. The average experience is that you rarely used more than say 10" but there are times that 13"...

   Liked On: 21-08-2023, 08:39 AM

10. 
    Bill999 liked post by Beetroot On thread : Bipod heights

    I always like to think of bipod heights in relation to the Harris sizes 6-9 or 9-13. 6-9 is only useful for bench shooting/target shooting of a flat range. 9-13 is considerably more useful in the...

    Liked On: 21-08-2023, 08:38 AM

11. 
    Bill999 liked post by Kelton On thread : Bipod heights

    Iv got the mountain I went for the long dins it brilliant shooting over banks and up hill in longer grass il measure . dannyb both adjustable they donthe splits to which helps get higher or lower...

    Liked On: 21-08-2023, 08:38 AM

12. 
    Bill999 liked post by taking_the_gun_for_a_walk On thread : What little pesties did you bowl over today?

    Cleaned up a whole mob in one go.231187 They kept running in circles and couldnt figure where the shots came from

    Liked On: 17-08-2023, 11:32 AM

13. 
    Bill999 liked post by Rock river arms hunter On thread : What magnification are you running in the bush?

    Hands down 2-12 . You wouldn't go wrong with a 2-10 either. Although it lives on x4 most of the time. I find x12 bloody useful for seeing further down into the bush and identifying things.

    Liked On: 14-08-2023, 06:09 AM

14. 
    Bill999 liked post by Longrun On thread : What magnification are you running in the bush?

    2-7 or 3-9 for me

    Liked On: 12-08-2023, 04:35 PM

15. 
    Bill999 liked post by Sidetrack On thread : Kiwi made Howa mini ultralight chassis a reality?

    Settled on this basic configuration at this stage. Will add a couple of minor bits and pieces but as it stands , it’s perfect. All up it weighs in at 2.5kg and balances beautifully. Wasn’t sure about...

    Liked On: 11-08-2023, 05:51 PM

Page 18 of 144 First ... 456789101112131415161718192021222324252627282930313268118 ... Last

• Jump to page: