Bill999
Member

1851 Likes

Page 36 of 124 First ... 222324252627282930313233343536373839404142434445464748495086 ... Last

• Jump to page:

1. 
   Cordite liked post by Bill999 On thread : Loading 7.62x39 subsonic from steel cased factory ammo

   thats awesome to know, I have heard forever that steel is non reloadable Id be grabbing a bag of Roberts 151gr hollow points and a bit of trailboss if you can find it, makes for cheeper than buying...

   Liked On: 21-04-2022, 07:09 PM

2. 
   john m liked post by Bill999 On thread : Loading 7.62x39 subsonic from steel cased factory ammo

   I use 30cal subs for everything these days, in 300blk It works well on everthing from turkeys to home kill bulls shots need to sever the spine(hard) or scramble the brain(less hard) I site for...

   Liked On: 21-04-2022, 02:24 PM

3. 
   tikka liked post by Bill999 On thread : Loading 7.62x39 subsonic from steel cased factory ammo

   you could replace the powder with a subsonic type like trailboss it would be better to start with a brass case as steel is not what loading gear is made for and possibly could(probably will)...

   Liked On: 21-04-2022, 11:38 AM

4. 
   rugerman liked post by Bill999 On thread : kick arse suppresor ?

   I tried all my suppressors on my 1022 as most of my rifles are 1/2-20 thread too it makes bugger all difference and centerfire suppressors including my muzzle forward dpt with at least 8 baffles on...

   Liked On: 21-04-2022, 09:20 AM

5. 
   rugerman liked post by Bill999 On thread : Toyota Hilux Servicing

   I means inspect they dont even change the gearbox oil this is hardly a big service most of the "I" inspections at dealerships are done with magic wands find a mechanic you trust and dont...

   Liked On: 20-04-2022, 02:59 PM

6. 
   XR500 liked post by Bill999 On thread : Toyota Hilux Servicing

   I means inspect they dont even change the gearbox oil this is hardly a big service most of the "I" inspections at dealerships are done with magic wands find a mechanic you trust and dont...

   Liked On: 20-04-2022, 09:29 AM

7. 
   Micky Duck liked post by Bill999 On thread : 22lr barrel length

   yeh i have a 13 inch pooger 10/22 I asked for 12.5 but ended up with 13ish it is more accurate now it was as accurate or better than my model 2 brno I only use subs and it eats without...

   Liked On: 19-04-2022, 10:03 PM

8. 
   Micky Duck liked post by Bill999 On thread : Owl optics 410 suppressed shotgun

   Iv seen the FFS one in action and it must have been the early one as it was off the chart quiet quieter than my 300blk with a big suppressor on it far quieter than I thought possible with a...

   Liked On: 19-04-2022, 08:35 PM

9. 
   Brian liked post by Bill999 On thread : Owl optics 410 suppressed shotgun

   Iv seen the FFS one in action and it must have been the early one as it was off the chart quiet quieter than my 300blk with a big suppressor on it far quieter than I thought possible with a...

   Liked On: 19-04-2022, 10:27 AM

10. 
    Woody liked post by Bill999 On thread : The $3000 gong gun

    then at least you can sell it in a month when you are bored of it not the big market for second hand mossberg rifles with their less than stellar track record of producing absolute trash

    Liked On: 18-04-2022, 12:07 PM

11. 
    dannyb liked post by Bill999 On thread : The $3000 gong gun

    Easy enough to remove dents in wood with a damp towel an iron Sent from my iPhone using Tapatalk

    Liked On: 18-04-2022, 11:48 AM

12. 
    Moa Hunter liked post by Bill999 On thread : Problematic 6mm Remington

    Iv seen 3 inch groups from an incorrect mag box installation too the mag box should not bind between the bottom metal and action it should be able to wiggle around I cant recommend someone modify...

    Liked On: 16-04-2022, 02:58 PM

13. 
    csmiffy liked post by Bill999 On thread : Problematic 6mm Remington

    Iv seen 3 inch groups from an incorrect mag box installation too the mag box should not bind between the bottom metal and action it should be able to wiggle around I cant recommend someone modify...

    Liked On: 15-04-2022, 09:17 AM

14. 
    caberslash liked post by Bill999 On thread : Problematic 6mm Remington

    Iv seen 3 inch groups from an incorrect mag box installation too the mag box should not bind between the bottom metal and action it should be able to wiggle around I cant recommend someone modify...

    Liked On: 14-04-2022, 09:57 PM

15. 
    Micky Duck liked post by Bill999 On thread : Dealing with a flinch

    get a gun that dosent hurt you when you fire it. limbsaver + 243 + suppressor in any weight it wont hurt you. I run a kimber montana(very light) and dislike recoil

    Liked On: 14-04-2022, 09:47 PM

Page 36 of 124 First ... 222324252627282930313233343536373839404142434445464748495086 ... Last

• Jump to page: