Ready to get a few rabbits again with old Baikal 12g with concentric fitted unused Anshutz 1410 barrel Firing pin can be changed from concentric for 12g to offset pin for .22lr $100 for shotgun $40...
Liked On: 09-05-2022, 05:44 PM
Here is a nice solution for ballistics conversions for those that prefer to stick with MOA. Just make up the table in Excel, make the cell color black and the text color what ever you prefer. ...
Liked On: 09-05-2022, 09:56 AM
Picture tells a thousand words. Pattern is from when using 14in semi but is same out of the 13in pump, went to pump because it lowered noise heaps more being contained in closed breach (lots of extra...
Liked On: 05-05-2022, 03:43 PM
I have been wanting one of these for a while now. Many of you will know I'm all about a short handy rifle that can still stretch the legs a bit for hunting. The whole idea of the SAUM for me over my...
Liked On: 05-05-2022, 09:07 AM
This is all very sensible indeed and comes from decent experience. saum7 i have 284's, a 7mm Saum, a 28 Nosler running 195's at 3100, and a 300 Rum, running 210's, all light hunting weight...
Liked On: 03-05-2022, 03:50 PM
Hi all, Had a few missions destinations planed on different weather forecasts and wind was from the south much of the trip and the spot x plan 2 was chosen with 5 headwaters. It a fairly popular...
Liked On: 03-05-2022, 11:40 AM
300BLK Here’s a sow I shot last week with the 308win using 151gr HP cast lead from 7m, 2 minutes before that I shot a possum. Will use theses projectiles in both 308 and 300 blackout. I your...
Liked On: 03-05-2022, 11:37 AM
The easiest way to correct primary extraction issues on the M700 is to built up the cam contact point on the receiver with TIG weld and file it to the correct size. The back of the receiver is not...
Liked On: 03-05-2022, 09:32 AM
You need to be careful with loading Subs in the 7mm calibres you need to use bullet around 120 grains the heavier bullets are too long to stabilise at 1040fps If you don't mind a trip to Tokoroa I...
Liked On: 03-05-2022, 09:30 AM
fyi- I got one of these in from the UK- works very well- so easy- and makes the Preval sprayer seem Neolithic. https://www.neatandhandy.com/products/premium-airbrush-for-hobbies-crafts
Liked On: 28-04-2022, 04:49 PM
Gave the stock a birthday too. Came up real good too. https://i.vgy.me/A0Ky5M.jpg https://i.vgy.me/PjTII2.jpg https://i.vgy.me/6Dla3q.jpg https://i.vgy.me/zdP0E2.jpg
Liked On: 28-04-2022, 01:12 PM
Yes, I've had this problem. I contacted Timney and they knew straight away what the problem was and posted a replacement sear to me. No questions, no cost. Standard trigger... 195614 Timney...
Liked On: 26-04-2022, 07:15 PM
Is this the kind of thread where we tell the internet how tough we are? Well, lucky for them I wasnt there. Because I would have gripped their balls so hard it would have produced diamonds. Then I...
Liked On: 26-04-2022, 05:46 PM
Should be someone local who can flick you some of their old primers. Even if you don’t reload you can still deprime and reprime with a hammer a nail and a piece of wood with the right shaped hole...
Liked On: 26-04-2022, 09:34 AM
They did but the stock it’s self I wouldn’t mind betting is 650grams ish on the factory carbon howa not many go sub 600 and only a handful go sub 500 that iv seen its a real bonus as you can buy...
Liked On: 24-04-2022, 09:00 AM