BillyDixon
Member

69 Likes

Page 1 of 5 12345 Last

• Jump to page:

1. 
   nor-west liked post by BillyDixon On thread : Walnut and blued steel,

   Here is another Mannlicher Shoenauer model 1910 takedown in .375 Rimless Nitro Express (9.5 M-S) - where do I keep finding them...this one is a very old stock but it is not factory original, it was...

   Liked On: 16-11-2024, 08:32 PM

2. 
   short swede liked post by BillyDixon On thread : Walnut and blued steel,

   Here is another Mannlicher Shoenauer model 1910 takedown in .375 Rimless Nitro Express (9.5 M-S) - where do I keep finding them...this one is a very old stock but it is not factory original, it was...

   Liked On: 08-10-2024, 05:40 PM

3. 
   Ross Nolan liked post by BillyDixon On thread : Walnut and blued steel,

   Here is another Mannlicher Shoenauer model 1910 takedown in .375 Rimless Nitro Express (9.5 M-S) - where do I keep finding them...this one is a very old stock but it is not factory original, it was...

   Liked On: 06-10-2024, 09:36 PM

4. 
   NRT liked post by BillyDixon On thread : Walnut and blued steel,

   Here is another Mannlicher Shoenauer model 1910 takedown in .375 Rimless Nitro Express (9.5 M-S) - where do I keep finding them...this one is a very old stock but it is not factory original, it was...

   Liked On: 06-10-2024, 09:33 PM

5. 
   paremata liked post by BillyDixon On thread : Walnut and blued steel,

   Here is another Mannlicher Shoenauer model 1910 takedown in .375 Rimless Nitro Express (9.5 M-S) - where do I keep finding them...this one is a very old stock but it is not factory original, it was...

   Liked On: 06-10-2024, 09:29 PM

6. 
   Waynesworld liked post by BillyDixon On thread : Walnut and blued steel,

   Here is another Mannlicher Shoenauer model 1910 takedown in .375 Rimless Nitro Express (9.5 M-S) - where do I keep finding them...this one is a very old stock but it is not factory original, it was...

   Liked On: 06-10-2024, 07:41 PM

7. 
   Jhon liked post by BillyDixon On thread : 7mm-08 reloads extraction issue - thoughts please

   The giveaway is the case coming free after waiting a few minutes. That to me is soft case expanding with hot load, then when it cools down it releases enough to extract. Ive had it before. You...

   Liked On: 23-08-2024, 11:30 PM

8. 
   Micky Duck liked post by BillyDixon On thread : 7mm-08 reloads extraction issue - thoughts please

   The giveaway is the case coming free after waiting a few minutes. That to me is soft case expanding with hot load, then when it cools down it releases enough to extract. Ive had it before. You...

   Liked On: 23-08-2024, 07:14 PM

9. 
   shananah liked post by BillyDixon On thread : White River Primers - Any misfire issues?

   What upsets me most about all this, is that he threw the powder away. Why did he throw the powder away? Not only do I reuse the powder from dismantled cartridges, I reuse the primers too. And the...

   Liked On: 17-08-2024, 11:10 PM

10. 
    Micky Duck liked post by BillyDixon On thread : Decision on an ethical shot

    If long range hunting involved having less gear, cheaper equipment and no esoteric calculations, I believe nobody would bother doing it.

    Liked On: 17-08-2024, 04:31 PM

11. 
    tetawa liked post by BillyDixon On thread : White River Primers - Any misfire issues?

    What upsets me most about all this, is that he threw the powder away. Why did he throw the powder away? Not only do I reuse the powder from dismantled cartridges, I reuse the primers too. And the...

    Liked On: 15-08-2024, 08:33 PM

12. 
    30.06king liked post by BillyDixon On thread : White River Primers - Any misfire issues?

    What upsets me most about all this, is that he threw the powder away. Why did he throw the powder away? Not only do I reuse the powder from dismantled cartridges, I reuse the primers too. And the...

    Liked On: 15-08-2024, 08:18 PM

13. 
    Nasty Factory Trigger liked post by BillyDixon On thread : Expander ball coming loose on Hornady precision dies

    Had same problem with my Hornady dies. I emailed them and they said to use Loctite on it. I did that and it's been fine ever since. You will break off the decapping pin if it gets loose, ask me...

    Liked On: 14-08-2024, 10:25 PM

14. 
    flock liked post by BillyDixon On thread : Expander ball coming loose on Hornady precision dies

    Had same problem with my Hornady dies. I emailed them and they said to use Loctite on it. I did that and it's been fine ever since. You will break off the decapping pin if it gets loose, ask me...

    Liked On: 13-08-2024, 06:28 PM

15. 
    Kiwilad2021 liked post by BillyDixon On thread : Expander ball coming loose on Hornady precision dies

    Had same problem with my Hornady dies. I emailed them and they said to use Loctite on it. I did that and it's been fine ever since. You will break off the decapping pin if it gets loose, ask me...

    Liked On: 12-08-2024, 08:41 PM

Page 1 of 5 12345 Last

• Jump to page: