Billymavs
Member

33 Likes

Page 1 of 3 123 Last

• Jump to page:

1. 
   Billymavs liked post by Howa1500 On thread : Best AR platform .22 ????

   Shit like this is now why I fucking hate this forum now and check in once a blue moon

   Liked On: 23-02-2025, 02:26 AM

2. 
   Billymavs liked post by gimp On thread : Best AR platform .22 ????

   269298

   Liked On: 23-02-2025, 02:25 AM

3. 
   Billymavs liked post by dogmatix On thread : Powder in Greek HXP .303 MKVII?

   I’ve read it’s equivalent to W760, but that would mean it’s a very light charge of 41gns

   Liked On: 14-02-2025, 06:20 PM

4. 
   Billymavs liked post by csmiffy On thread : Ford ranger 2 litre bi turbo

   Is that the 4.0 v6 from 20 years back

   Liked On: 04-02-2025, 01:02 AM

5. 
   Billymavs liked post by svt40 On thread : Cartridge ID please

   Spot on. Just had a look at the ww2 6.5 jap here and they have the identical primer crimp pattern, 76mm overall and the bullet is sealed with red lacquer - you can see a trace of the same in the...

   Liked On: 28-01-2025, 02:14 AM

6. 
   Billymavs liked post by No.3 On thread : ZKK-600 7x57 Hard to chamber

   Is the bolt assembled correctly and it works fine without a round trying to chamber?

   Liked On: 11-12-2024, 10:52 PM

7. 
   Billymavs liked post by Marty Henry On thread : ZKK-600 7x57 Hard to chamber

   Take a factory round coat it in engineers blue or black felt marker and gently chamber it stopping when there's definite resistance remove and see where it's binding. Failing that take a chamber...

   Liked On: 11-12-2024, 10:52 PM

8. 
   Billymavs liked post by Roarless20 On thread : ZKK-600 7x57 Hard to chamber

   I just tidied up my mates grandads rifle, brno zkk 600 7x57. It has a tight chamber too. Factory Federal 7x57 is hard to chamber. We pulled the loads, bumped the shoulder back and upped the charge 2...

   Liked On: 11-12-2024, 10:47 PM

9. 
   Billymavs liked post by Micky Duck On thread : 300 Dakota, and what to rechamber in.

   Pretty sure the Duleys had some hot 7mm built on the 404 case...fat max I think they nicknamed it??

   Liked On: 08-12-2024, 03:41 PM

10. 
    Billymavs liked post by quentin On thread : Tripods, who’s using what, and what to avoid ?

    After tutu'ing around with various tripods many of which were camera focused, here are my findings: Light weight tripods are ok for a camera, but lack stability when throwing a rifle on top. The...

    Liked On: 18-11-2024, 08:36 AM

11. 
    Billymavs liked post by MB On thread : Tripods, who’s using what, and what to avoid ?

    I was going to mention the same. They have their place for sure, but probably not what the OP is looking for. After being impressed with the full length version, I've just ordered the short version...

    Liked On: 17-11-2024, 08:13 PM

12. 
    Billymavs liked post by Marty Henry On thread : Tripods, who’s using what, and what to avoid ?

    A trigger stick isn't quite the same but I'm finding one really useful.

    Liked On: 17-11-2024, 05:48 PM

13. 
    Billymavs liked post by 199p On thread : Tripods, who’s using what, and what to avoid ?

    I got one of these I have had a fee silk tripods and i think vanguard but the ball head are such a pain in the ass to use after using a fluid i had to get one. ...

    Liked On: 17-11-2024, 05:48 PM

14. 
    Billymavs liked post by kiwijames On thread : Tripods, who’s using what, and what to avoid ?

    I have an Aziak Back Country with the same ball head. It’s a nice compromise between weight and stability. I also have a bino clamp that mounts to the Arca. I like it so far

    Liked On: 17-11-2024, 05:48 PM

15. 
    Billymavs liked post by Jus On thread : Tripods, who’s using what, and what to avoid ?

    Tricer make a good tripod. 2 different sizes, ship out of modern hunter in aus. Good weight to stability ratio

    Liked On: 17-11-2024, 05:48 PM

Page 1 of 3 123 Last

• Jump to page: