I'm looking for a chance to try these on them next time. 55g RN .224 bullet, nose flattened with a small hollow point (using a small centre drill in the lathe), travelling at 1020 fps. Quieter than...
Liked On: 13-01-2025, 09:55 PM
Yep, thanks. Sorry meant to drop you a line yesterday, but got all excited to get going, as I was on school holiday duty!
Liked On: 10-01-2025, 07:43 AM
With the primer pin set very high, the expander might have been up high enough that it was trying to squeeze the neck against the expander. Not physically enough space for the neck of the cartridge...
Liked On: 09-01-2025, 04:59 PM
pretty sure my Sytong self-adjusts, as it really noticeable when you scan from land to water as the image briefly freezes then the colour "shades" change... 55six will be able to tell you more I'm...
Liked On: 07-01-2025, 10:08 PM
With the primer pin set very high, the expander might have been up high enough that it was trying to squeeze the neck against the expander. Not physically enough space for the neck of the cartridge...
Liked On: 04-01-2025, 10:56 AM
With the primer pin set very high, the expander might have been up high enough that it was trying to squeeze the neck against the expander. Not physically enough space for the neck of the cartridge...
Liked On: 04-01-2025, 09:54 AM
Here's a few things to ponder. No advice as such, but just an experience. I was using mine yesterday morning, shooting hares. Not in bush, but out in the open, in drizzle that turned to rain. The...
Liked On: 04-01-2025, 09:51 AM
Here's a few things to ponder. No advice as such, but just an experience. I was using mine yesterday morning, shooting hares. Not in bush, but out in the open, in drizzle that turned to rain. The...
Liked On: 04-01-2025, 09:42 AM
I've got some good groups at 50m shooting the 90 grain XTP in my 16" 308 with 4.5gr of AS50n, no fillers (see pic). Hasn't seemed to be position sensitive. You might try that instead of Trailboss to...
Liked On: 29-12-2024, 11:08 AM
I've got some good groups at 50m shooting the 90 grain XTP in my 16" 308 with 4.5gr of AS50n, no fillers (see pic). Hasn't seemed to be position sensitive. You might try that instead of Trailboss to...
Liked On: 28-12-2024, 03:33 PM
I double checked, looking at mine tonight. It doesn't use a transfer bar system like the Rossi and H&R single shot, but has a trigger interlock that prevents the hammer going forward enough to hit...
Liked On: 18-12-2024, 11:56 AM
Just checked, you cannot break open the Bergara when it is cocked. Mine has the hammer extension (they come standard). Interestingly, even though I was trying to let my thumb "slip", I couldn't! The...
Liked On: 17-12-2024, 05:59 PM
Nice! I've had good success (only at the range so far) with AS50n powder with no filler, with various projectiles from 90gr xtp to 230gr cast spire point in my 1:8 twist Bergara. Just about to try...
Liked On: 17-12-2024, 05:13 PM
I double checked, looking at mine tonight. It doesn't use a transfer bar system like the Rossi and H&R single shot, but has a trigger interlock that prevents the hammer going forward enough to hit...
Liked On: 17-12-2024, 08:15 AM
I double checked, looking at mine tonight. It doesn't use a transfer bar system like the Rossi and H&R single shot, but has a trigger interlock that prevents the hammer going forward enough to hit...
Liked On: 16-12-2024, 08:01 PM