bjp
Member

55 Likes

Page 1 of 4 1234 Last

• Jump to page:

1. 
   bjp liked post by robhughes-games On thread : Howa Superlite aluminium bottom metal

   It's taken a while, but the superlite bottom metals are coming off the machine. These ones will take the factory mags. The likelihood of doing a blind version is low for now. I've found that the...

   Liked On: 20-03-2025, 11:58 AM

2. 
   bjp liked post by Gunworks On thread : Gunworks modular Stacker suppressor review

   35mm dia 13.5" long and 41mm 9.5" long Stacker modular suppressors with muzzlebrakes on the end are now in production 35mm dia 13.5" $385 for 35mm 13.5" with 2 baffles & front cap or $495...

   Liked On: 11-03-2025, 05:10 PM

3. 
   bjp liked post by Southern lite On thread : Modern Packs

   Here is a couple of photos of my packs loaded up. The heavyest one was 48.9kg. just goes to show a pack the weights less then 1.5kg can infact handle a bit of weight. Also the UHMWPE fabrics can...

   Liked On: 11-03-2025, 04:17 PM

4. 
   bjp liked post by Pengy On thread : WTB: .308 150gn Speer Hot-cor or similar projectile new or pulled.

   I have 49 Hornady 150 gr spire point flat base here. @ $20 plus p & p sound ok?

   Liked On: 08-03-2025, 09:10 AM

5. 
   bjp liked post by Ross Nolan On thread : Dinner thread?

   It's in the freezer now. When the time comes for cooking it will be jointed and sautéed in the roasting dish with olive oil, onion, garlic, celery and diced carrots before deglazing with red wine...

   Liked On: 04-03-2025, 09:58 PM

6. 
   bjp liked post by No.3 On thread : Anyone crimp

   I had a .22 Hornet for a while, ordered some .223 bullets in specially for it. Stupidly I checked them with the mic - no difference to the .224 bulk pack ones I was using prior to getting them in. ...

   Liked On: 02-03-2025, 07:18 PM

7. 
   bjp liked post by Zeekus On thread : Retail options for modern left handed rifle

   I saw a 110 Ultralite in 6.5 PRC on deltamike about 30min after my OP! So there's some potential here for sure. Sent from my SM-G781B using Tapatalk

   Liked On: 25-02-2025, 10:19 PM

8. 
   bjp liked post by blip On thread : Cleaning Rods

   Ive got the popcorn

   Liked On: 25-02-2025, 12:53 PM

9. 
   bjp liked post by Ryan_Songhurst On thread : Vehicle immobiliser

   fitting a switch etc will do nothing to mitigate assholes wrecking your ignition and pulling half the dash out in the process to a point where fixing it would make you wish you just paid for...

   Liked On: 19-02-2025, 08:36 AM

10. 
    bjp liked post by yeah_na_missed On thread : Hunting Rifle

    Crikey dickens! Respectfully, could someone kindly start a new thread titled "The complete history of Mauser actions, and comparisons and perceived benefits of push feed Vs controlled feed"? Poor...

    Liked On: 18-02-2025, 01:38 AM

11. 
    bjp liked post by Tahr On thread : It's called a carbine, not a bush pig.

    It's part of the bull shit culture. Anyway, most so called "bush pigs" never go bush hunting their entire lives. It's a fad more than a necessity. No one called a Model 7 with a 18/20" barrel a...

    Liked On: 18-02-2025, 01:13 AM

12. 
    bjp liked post by akaroa1 On thread : Sand Casting. Who's done / doing it ?

    Still a lot to do but a bit closer to being at least visually correct 268432

    Liked On: 13-02-2025, 10:57 PM

13. 
    bjp liked post by Gunworks On thread : New Modular Suppressor designed by Gunworks

    Newly released Gunworks Stacker 35mm Dia Modular Suppressor. 41mm and 50mm modular suppressors to be released later this month. Refer to our website for prices and weights. Each suppressor...

    Liked On: 10-02-2025, 12:27 PM

14. 
    bjp liked post by flock On thread : Susimi

    Albacore Tuna & sweet Soy sauce, fresh from over the W Coast. Awesome:) 268153

    Liked On: 03-02-2025, 04:21 PM

15. 
    bjp liked post by DPT On thread : Common Thread Mismatches – Important Information

    Hi everyone, This topic comes up from time to time, so I thought I’d put together a post to help clarify the issue. Unfortunately, several different thread sizes can screw onto each other,...

    Liked On: 30-01-2025, 10:34 AM

Page 1 of 4 1234 Last

• Jump to page: