Blucas26
Member

14 Likes

1. 
   Blucas26 liked post by 199p On thread : 7mm prc

   Mine shoots the factory Hornady very well but its slow around 2700 Need to get some federal loads to try 249079

   Liked On: 29-04-2024, 09:10 PM

2. 
   Blucas26 liked post by 199p On thread : 7mm prc

   your all good bro yip 175 eldx Got maybe 40 rounds down the tube so far, and its 20"

   Liked On: 29-04-2024, 09:10 PM

3. 
   Blucas26 liked post by 199p On thread : 7mm prc

   Yeah Hornady dropped the ball on the powders and speeds They talked about on a podcast that they couldn't get enough of the top powders and had to get what they could at time of loading. They...

   Liked On: 29-04-2024, 09:10 PM

4. 
   Blucas26 liked post by Jus On thread : 7mm prc

   I was getting 2850-2900 with the first lot of hornady factory out of a 20” barrel, sub moa easliy. The higher speeds were giving some stiff bolt lift. I hit pressure at 2850 with 180 eld-m hand...

   Liked On: 29-04-2024, 07:41 PM

5. 
   Blucas26 liked post by Pommy On thread : 7mm prc

   See the 7mm PRC lemon thread.

   Liked On: 29-04-2024, 07:03 PM

6. 
   Blucas26 liked post by Gkp On thread : AIC Magazine

   Hardys

   Liked On: 09-04-2024, 12:51 PM

7. 
   Blucas26 liked post by Pixie Z On thread : Wettie vs Rob Allen

   Honestly, either would be sweet, especially for starting out and for round Chch. In my opinion it won't really make much difference for your first few years. The biggest benefit for you for the first...

   Liked On: 13-03-2024, 07:41 PM

8. 
   Blucas26 liked post by viper On thread : Wettie vs Rob Allen

   Both are ok and will do the job but I wouldn't use either. This is purely a personal opinion but Wettie guns will be assembled using various parts from different suppliers and although there is no...

   Liked On: 13-03-2024, 07:40 PM

9. 
   Blucas26 liked post by Lost n confused On thread : Wettie vs Rob Allen

   Diving down around chch and kaikoura you want a small gun around 700-750 for butters, cod, moki when starting out. Either brand will be OK for that. If you're hitting the sounds in summer chasing...

   Liked On: 13-03-2024, 07:40 PM

10. 
    Blucas26 liked post by Sharki On thread : Wettie vs Rob Allen

    Been using robs guns since late 80s when he used to make em in his shed Can't go wrong, parts easily available etc. U can buy parts from SA and put it together yourself to save some $

    Liked On: 13-03-2024, 07:40 PM

11. 
    Blucas26 liked post by nickbop On thread : Wettie vs Rob Allen

    you wont go wrong with either, I have both of thier gear, the biggest thing as a noob is time in the water and a good wetsuit to be warm and comfortable, just pick one and dive lots

    Liked On: 13-03-2024, 07:40 PM

12. 
    Blucas26 liked post by LOC On thread : Wettie vs Rob Allen

    I own quite a lot of gear of both brands Some gear Wettie is perfectly ok, wetsuits, floats, lines etc But for spearguns stick with Rob Allen. Have two wettie guns that both jam with any hint of...

    Liked On: 13-03-2024, 07:40 PM

13. 
    Blucas26 liked post by MB On thread : Wettie vs Rob Allen

    I've had a few Wettie suits and they've been good. I'm sure Rob Allen suit owners would say the same. For me, it would come down to fit if you can try them on.

    Liked On: 13-03-2024, 07:40 PM

14. 
    Blucas26 liked post by kam555 On thread : What happened to the Buy, Sell, Swap section?

    Hey Team, Been a few months since I've been on here, but what's happened to the buy sell swap section. I'm in the market for a few things and can't work out where the best place to see what people...

    Liked On: 06-08-2023, 11:08 PM