BRADS
Member

9296 Likes

Page 6 of 620 First 123456789101112131415161718192056106506 ... Last

• Jump to page:

1. 
   BRADS liked post by Kiwi Greg On thread : The Zero Check Thread

   There is ALWAYS a story behind the story.......who are their sponsors etc, etc Having had personal experience over the years with Ryan Avery & a couple of his mates/cohorts, I can tell you they...

   Liked On: 26-01-2025, 07:48 AM

2. 
   BRADS liked post by Kelton On thread : Maintaining zero after flying

   Yet to loose a zero mate good hard case good scope and good rings

   Liked On: 25-01-2025, 08:11 PM

3. 
   BRADS liked post by 338MAN mk2 On thread : Maintaining zero after flying

   Quality scope and rings go a long way for piece of mind an the question but unless you are still living in the past, your gun will be suppressed so no drama about checking the zero on the block....

   Liked On: 24-01-2025, 11:16 PM

4. 
   BRADS liked post by Mathias On thread : 30-06ai 60 series custom landcruiser build

   Drive shalf universal angles are something you need to keep an eye on. Google is your friend on info to check. Flanges need to be within a couple of degrees parallel of each other for smooth running....

   Liked On: 23-01-2025, 08:57 PM

5. 
   BRADS liked post by blip On thread : Old Nissan Safari query

   You used to be able to get kits with all the seals bearings gaskets and stub axle

   Liked On: 21-01-2025, 10:46 PM

6. 
   BRADS liked post by chainsaw On thread : Which smartwatch to get

   Garmin Fenix

   Liked On: 21-01-2025, 11:54 AM

7. 
   BRADS liked post by 7mmwsm On thread : Disposing of expired license

   I've just renewed my licence. I got the email on Thursday saying I had been approved. I must admit, when I got to the bit where they said I had been approved, I stopped reading. To be honest, I was...

   Liked On: 19-01-2025, 08:40 AM

8. 
   BRADS liked post by blip On thread : Old Nissan Safari query

   Yea unbolt the stub axle pretty sumilar set up to a landcruiser from memory

   Liked On: 19-01-2025, 06:52 AM

9. 
   BRADS liked post by TeRei On thread : loading 243 soon

   43gr 2209 and no pressure or 44gr and getting hotter.

   Liked On: 18-01-2025, 11:00 PM

10. 
    BRADS liked post by John Duxbury On thread : loading 243 soon

    The fastest powder in a long barrel is the fastest powder in a short barrel as well. Just use 2209 for the .243.

    Liked On: 18-01-2025, 04:08 PM

11. 
    BRADS liked post by Ryan_Songhurst On thread : Weighing gold anyone know what they are doing?

    Where's tussock when you need him

    Liked On: 18-01-2025, 12:28 PM

12. 
    BRADS liked post by dale On thread : Hilux hybrid.4wd vs dmax ls 4wd

    At the end of the day, every major brand has its share of stories about how unreliable their vehicles can be. Take the Ranger, for example—you’ll hear plenty of complaints. However, when you compare...

    Liked On: 17-01-2025, 07:01 AM

13. 
    BRADS liked post by Sakoswarosorted On thread : Impact joules and ethics

    Most bullets will bounce off a deer at 999 foot pounds and will actually ricochet

    Liked On: 16-01-2025, 07:54 PM

14. 
    BRADS liked post by 7mmwsm On thread : Outboard HP Advise

    A lot depends on the weight you want to haul. Two people at 60 kg verses two at 100 kg will require different amounts. Better to be "over gunned" though.

    Liked On: 15-01-2025, 04:43 PM

15. 
    BRADS liked post by buzzmann On thread : Sako lovers

    And now[emoji23] sako 85 carbonlite 17” Dpt mk11 suppressor vx2 3-9x40 https://uploads.tapatalk-cdn.com/20250110/b006f125ac738ace3b103b367269e1ef.jpg Sent from my iPhone using Tapatalk

    Liked On: 10-01-2025, 09:21 PM

Page 6 of 620 First 123456789101112131415161718192056106506 ... Last

• Jump to page: