buell984
Member

2212 Likes

Page 56 of 148 First ... 64243444546474849505152535455565758596061626364656667686970106 ... Last

• Jump to page:

1. 
   buell984 liked post by Bill999 On thread : tight closing the bolt

   could be too long case lenght and needing a trim could be the decapping ball pulling the shoulder forward a bit on the up stroke (too much friction and needs a bit of lube) could be that the...

   Liked On: 01-02-2022, 09:28 AM

2. 
   buell984 liked post by Cigar On thread : tight closing the bolt

   Without more information, the most likely reason is the cases were fired first in another rifle, that has a slightly larger chamber than the new rifle. If so, they should be full length sized as...

   Liked On: 01-02-2022, 09:28 AM

3. 
   buell984 liked post by dannyb On thread : tight closing the bolt

   https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.youtube.com/watch%3Fv%3DlLG2kSrD40g&ved=2ahUKEwi31Prr19r1AhWBxjgGHUtHC10Qxa8BegQIBhAB&usg=AOvVaw1y8u6IcpgzKO4U3W_zUhVi

   Liked On: 31-01-2022, 01:43 PM

4. 
   buell984 liked post by 6x47 On thread : tight closing the bolt

   The issue is almost certainly the bottom of the case (head/ web area) has expanded to fully reach the chamber dimensions. If FL sizing doesn't fix the problem without shifting the shoulder too much (...

   Liked On: 31-01-2022, 01:40 PM

5. 
   buell984 liked post by Bill999 On thread : tight closing the bolt

   most are solved by winding the FL die down a little more lubing the expander ball or inside the case necks should help that firm lift. I forget that old dies dont need it and new dies kind of...

   Liked On: 31-01-2022, 01:40 PM

6. 
   buell984 liked post by zimmer On thread : tight closing the bolt

   Unclear if the once fired cases were fired in the new rifle/chamber. I'm guessing not. Need to FLS. Check trim to length. Try before loading (should do that as part of FLSing process at any rate....

   Liked On: 31-01-2022, 12:48 PM

7. 
   buell984 liked post by 25/08IMP On thread : tight closing the bolt

   Another thought just try and chamber an unprimed empty but sized case I have had some cases where the primer wasn't seated deep enough so if you try a sized but unprimed it can eliminate a few...

   Liked On: 31-01-2022, 12:46 PM

8. 
   buell984 liked post by GWH On thread : tight closing the bolt

   Yep, stop just neck sizing. FL them everytime, its the only way you can keep case dimensions consistent each and every time. If that case has been fired in a different chamber that will be the...

   Liked On: 31-01-2022, 11:42 AM

9. 
   buell984 liked post by JohnDuxbury On thread : tight closing the bolt

   You will need full length resize those cases next time round, if you have just been neck sizing them. If you can close the bolt on them they will be fine too shoot, in fact a tight fit will make...

   Liked On: 31-01-2022, 11:42 AM

10. 
    buell984 liked post by dannyb On thread : tight closing the bolt

    Cant offer much advice but was the brass originally fired in the chamber of the rifle your loading for ? I did have this issue once a while back in my 270wsm and it was fixed by winding my full...

    Liked On: 31-01-2022, 11:41 AM

11. 
    buell984 liked post by DavidGunn On thread : Am I being stupid?

    Yes, you are being stupid...happy with that?....you need a dedicated bench for reloading, cupboards full of shit you may never use, tins and tins of powder, projectiles of every calibre, even for...

    Liked On: 31-01-2022, 10:33 AM

12. 
    buell984 liked post by Nathan F On thread : Hunting Boots

    Meindl's 6 th pair now all up i think

    Liked On: 20-12-2021, 02:03 PM

13. 
    buell984 liked post by stagstalker On thread : Another Pack Recommendation

    https://www.bivouac.co.nz/osprey-men-s-aether-ag-85-tramping-pack.html

    Liked On: 20-12-2021, 01:57 PM

14. 
    buell984 liked post by DavidGunn On thread : Lets See The Transport havn a Oops moment

    Got it all the way to site with digger, that corner was the first or second one of about 6 to get around...will be unloaded in the morning and off to find a repair shop. 185828

    Liked On: 20-12-2021, 01:43 PM

15. 
    buell984 liked post by DavidGunn On thread : Lets See The Transport havn a Oops moment

    Somewhere up in the hills around Nelson today we dropped a driveshaft...be along day tomorrow getting it sorted, supposed to be back in the North Island tomorrow. 185826 185827

    Liked On: 20-12-2021, 01:42 PM

Page 56 of 148 First ... 64243444546474849505152535455565758596061626364656667686970106 ... Last

• Jump to page: