My boat got stripped at Loch Katrine... dunno if you'd necessarily be better off leaving a vehicle there. At least it involves a bit more effort to get into though I suppose
Liked On: 27-01-2025, 07:23 PM
Yes ,they are.I have my Grandfather's one. Spent countless hours (and ammo) roaming around the farm as a kid chasing rabbits and possums....and the odd tin can! Sent from my SM-G525F using Tapatalk
Liked On: 29-10-2024, 05:25 PM
Stick with subs or standard velocity ammo and it should last for ever
Liked On: 29-10-2024, 05:25 PM
Let us know how you get on. I there is nothing obstructing the tube then I'm afraid I have no idea what the issue might be. Sent from my SM-G525F using Tapatalk
Liked On: 27-10-2024, 03:34 PM
put the tube over a good straight edge and make sure its not bent they can get dropped during loading does not do them any good as far as feeding goes
Liked On: 27-10-2024, 03:34 PM
A drift punch is the better way to do it. An extra pair of hands to prevent the spring tension launching parts in to the future is always helpful
Liked On: 27-10-2024, 07:44 AM
It is a tight fit. If you gently tap with a hammer in the direction of the red arrow, it will poke out the opposite side. You should then be able to grab it with pliers an pull all the way out. Be...
Liked On: 26-10-2024, 05:25 PM
Possibly, someone has attempted to restrict the number of rounds the mag will take. If you gently tap this pin out you may find something inside that is obstructing the follower?...
Liked On: 26-10-2024, 05:14 PM
Check the end of the mag tube, where the follower protrudes. The ends can get a bit beat up over the years. Should have a slight chamfer there to help the tube slide over the rounds. Simply running...
Liked On: 26-10-2024, 04:24 PM
Have you tried dismantling the spring tube. Thats where I would start. There is a pin at the end with the knurling that you have to drift out. That will release the spring and follower. The guns...
Liked On: 26-10-2024, 03:19 PM
I've got one made from Blue gum branch.deliberately have left it a bit fat.works well.
Liked On: 16-08-2024, 01:41 PM
The rust wheel thing that looks a bit like Scotch Brite... That goes on angle grinder.whirly plastic thing will bring that right back to good again in no time.chuck some oil or fat on it straight...
Liked On: 16-08-2024, 01:38 PM
Yes Geraldine butchery.support the local guy or you no longer have a local guy.
Liked On: 21-07-2024, 03:09 PM
Just thought I'd get in everyone's face with some pictures of Rainy Day Projects that I tinker with to utilize my collection of Antlers and give me another dimension to a lifetime of wandering our...
Liked On: 16-07-2024, 11:12 PM
Try taking the rear seat base out.only two bolts each... Gives another 150-200mm at front. I regularly take one out on the driver's side n just leave it out.gives more room for dogs but still got...
Liked On: 15-07-2024, 06:46 PM