C.T.
Member

52 Likes

Page 1 of 4 1234 Last

• Jump to page:

1. 
   C.T. liked post by Hunter_Nick On thread : Anyone ever had scope rings slide/move on a dovetail/sako mounting system?

   I saw a dude dump a new VX6 on the ground at the range, after the rings somehow jumped out of the back of the Sako dovetail. Couldn’t believe it myself, but it happened. The dude said ‘the shop...

   Liked On: 21-03-2022, 09:46 PM

2. 
   C.T. liked post by 223nut On thread : Anyone ever had scope rings slide/move on a dovetail/sako mounting system?

   Had the factory rings move recently on my 308, been set up for 4-5yrs,ist have knocked something recently as one had moved by about an inch. Didn't notice till after a day shooting goats thinking I...

   Liked On: 21-03-2022, 09:45 PM

3. 
   C.T. liked post by 7mmsaum On thread : Anyone ever had scope rings slide/move on a dovetail/sako mounting system?

   Never had Optilocks move, the rear Optilock has a recoil dowel Always used a locating dowel when using Rails on Remington actions and customs

   Liked On: 21-03-2022, 09:45 PM

4. 
   C.T. liked post by Woody On thread : Anyone ever had scope rings slide/move on a dovetail/sako mounting system?

   Never seen mine move.

   Liked On: 21-03-2022, 09:44 PM

5. 
   C.T. liked post by Nickoli On thread : Anyone ever had scope rings slide/move on a dovetail/sako mounting system?

   Never had it happen with optilocks. Curious about whether it's possible with a rail that isn't "clamped" into place with some sort of screw system (such as NEAR etc)?

   Liked On: 21-03-2022, 09:44 PM

6. 
   C.T. liked post by dogmatix On thread : Anyone ever had scope rings slide/move on a dovetail/sako mounting system?

   Never had any of my Sakos or Tikkas had the Optilocks rings move. The lug/pin on the rear Tikka Optilock ring should prevent it slipping.

   Liked On: 21-03-2022, 09:44 PM

7. 
   C.T. liked post by ChrisW On thread : Need advice on damaged barrel thread

   Dont worry about it

   Liked On: 17-11-2021, 11:05 AM

8. 
   C.T. liked post by Finnwolf On thread : Need advice on damaged barrel thread

   X2. IF the barrel ever needs removed it will make the unscrewing a bit stiff but I doubt it will compromise the barrel or action. gundoc might have a more professional opinion.

   Liked On: 17-11-2021, 11:05 AM

9. 
   C.T. liked post by gundoc On thread : Need advice on damaged barrel thread

   As Finnwolf says, possibly a bit tight to remove but no compromise on strength.

   Liked On: 17-11-2021, 11:05 AM

10. 
    C.T. liked post by xyon On thread : Need advice on damaged barrel thread

    I would ignore it, but tell the gunsmith I was not happy as I asked them not to damage the thread. Being a bit OC myself I would possibly make a tool to remove the burr from the thread if I ever was...

    Liked On: 17-11-2021, 11:05 AM

11. 
    C.T. liked post by Cordite On thread : Need advice on damaged barrel thread

    Looks like the barrel thread is fairly easy to damage, so likely softer than the receiver thread. I expect it will unscrew just fine and with luck it will emerge with dent straightened out by...

    Liked On: 17-11-2021, 11:03 AM

12. 
    C.T. liked post by Longranger On thread : Need advice on damaged barrel thread

    Yes that would piss you off particularly after expressing a concern.....if the barrel is stainless there is a possibility of it seizing and galling on the action threads when removed. Best to...

    Liked On: 17-11-2021, 11:02 AM

13. 
    C.T. liked post by Carpe Diem On thread : Anyone using the "YoDave" Tikka trigger springs?

    Have them in my Tikka's after being put onto them by Happy great product. The biggest problem is getting bloody NZ post to deliver them. I ordered a set of two complete with import permit that were...

    Liked On: 12-06-2020, 01:03 PM

14. 
    C.T. liked post by faregame On thread : How to submit Import Permit Application form (POL67B)?

    You can email it as well Permitfirearms@police.govt.nz

    Liked On: 14-10-2019, 10:13 PM

15. 
    C.T. liked post by mudgripz On thread : All things Maxtoch..

    Yes - tested the 2X against a big handheld spottie and it was alot better. Even though its half the weight and a fraction the size of the biggest 210mm and 240mm HID Lightforce spotties, its up...

    Liked On: 09-06-2019, 10:43 PM

Page 1 of 4 1234 Last

• Jump to page: