caberslash
Member

3139 Likes

Page 120 of 210 First ... 2070106107108109110111112113114115116117118119120121122123124125126127128129130131132133134170 ... Last

• Jump to page:

1. 
   caberslash liked post by wsm junkie On thread : Taking Bets on a Nikko Stirling

   If its a Gold Crown it'll be fine:thumbsup:

   Liked On: 30-01-2022, 11:51 PM

2. 
   caberslash liked post by gundoc On thread : Zero MOA rail/base - why?

   Zero angle bases are easier and cheaper to make. Most centrefire rifles are never used beyond 300 metres and .22's beyond 100 metres so there is absolutely no point in fitting an angled base as those...

   Liked On: 30-01-2022, 07:36 PM

3. 
   caberslash liked post by zimmer On thread : Zero MOA rail/base - why?

   It's best if possible to be near the scopes optical centre at the most common long range to be shot. Also barrel indexing in a factory rifle is a lottery. It could end up at 6 o'clock ish which...

   Liked On: 30-01-2022, 07:36 PM

4. 
   caberslash liked post by Uplandstalker On thread : Remington 700 from 308 to 6.5CM Criterion prefit barrel quick job report

   I think I might still have one that is surplus to requirements. I'll try and find it for you Sent from my SM-G991B using Tapatalk

   Liked On: 30-01-2022, 06:30 AM

5. 
   caberslash liked post by lee308 On thread : Remington 700 from 308 to 6.5CM Criterion prefit barrel quick job report

   After asking suggestions from shooting mates, experienced forum members and gunsmith with varies custom build options. I have decided to do a home quick project to turn my Rem 700 Kreiger 24"...

   Liked On: 30-01-2022, 06:27 AM

6. 
   caberslash liked post by chainsaw On thread : On the wall at last

   Big 14 from a couple of years back, been safely boxed up from taxidermist for last 12 months waiting for his chance to get to Taupo and go up on the walk. In rating the beast was a blast, I’d...

   Liked On: 30-01-2022, 06:24 AM

7. 
   caberslash liked post by Wingman On thread : New 6mm ARC from Hornady

   I went googling for the first time since this cartridge was released and now understand why Hornady limited the case capacity on the ARC. It was to reduce pressure for the AR platform. This...

   Liked On: 29-01-2022, 11:19 AM

8. 
   caberslash liked post by janleroux On thread : Howa 1500 acis mag question

   It worked without modifying the feed ramp, but I had to modify the latch pin as the mag had some play which caused feeding issues. I checked with the agents and there was no option for longer latch...

   Liked On: 29-01-2022, 08:24 AM

9. 
   caberslash liked post by Wingman On thread : New 6mm ARC from Hornady

   More of a medium sized game cartridge. Its factory offerings come in 108gr ELDM and 103gr eldx. 1:8" twist is plenty. Like the grendel its perfect for our game in NZ. The holdup on the howa mini...

   Liked On: 29-01-2022, 08:23 AM

10. 
    caberslash liked post by andyanimal31 On thread : Zero MOA rail/base - why?

    Right, you have all missed some thing. I have always put on a 20 moa base on every thing, until I needed a rifle for thermal and standard optic using qd mounts. I was told by the thermal God I was...

    Liked On: 28-01-2022, 04:23 AM

11. 
    caberslash liked post by Tentman On thread : 223 Scope

    A Howa 1500 (not a mini) and a Rem Model 7. Both are wood blued and 1:9 ish twist. The Remmy has the flash CDL stock.

    Liked On: 27-01-2022, 06:09 AM

12. 
    caberslash liked post by Micky Duck On thread : 223 Scope

    mine wears a 3x9x50mm loopy....and has worn 2 other 3x9s...had a fixed 4 on for short time but the 3x9 is just about perfect for me...and my zero doesnt change from decade to decade,none of this...

    Liked On: 27-01-2022, 06:09 AM

13. 
    caberslash liked post by Slug On thread : Why mixing headers and pointers?

    I use to be a pure breed snob, never looked at anything else until I meet my current dog, like yours a %50 GWP x %50 huntaway (strong eyed heading and saw him working when picked up pup). Best god...

    Liked On: 27-01-2022, 05:30 AM

14. 
    caberslash liked post by NzHeavyHauler On thread : Why mixing headers and pointers?

    I have a GWP X NZheading and from personal experience i find you get a dog that looks, sounds, scents and points like a pointer but is far more clever and easier to train. They are also slightly...

    Liked On: 27-01-2022, 05:29 AM

15. 
    caberslash liked post by Russian 22. On thread : Why mixing headers and pointers?

    normally a mix is a lot cheaper as there's no "pedigree" snobbery and associated premium with a piece of paper that proves that it is an acceptable amount of inbred.

    Liked On: 27-01-2022, 05:19 AM

Page 120 of 210 First ... 2070106107108109110111112113114115116117118119120121122123124125126127128129130131132133134170 ... Last

• Jump to page: